View Full Version : Thoughts on crossbars
jmsspratlin
06-21-2007, 01:10 AM
Just wanted to get the majority op on the OEM cross bars for the H2. I am havving mixed feelings about some I purchased from a guy, however they have several dents and scratches on them. I hate to "half-ass" anything so I put them on, now (after fu*king scratching the roof of the truck due to a bent prong on the rail) I am debating taking them back off and just sending the damn things back to the guy and get a full refund instead of half. What would you guys do? Thanks for your help with this....Jamie:beerchug:
http://i152.photobucket.com/albums/s178/jmsspratlin/DSC01273.jpg
http://i152.photobucket.com/albums/s178/jmsspratlin/DSC01269.jpg
http://i152.photobucket.com/albums/s178/jmsspratlin/DSC01272.jpg
dеiтайожни
06-21-2007, 01:32 AM
That's what you get for buying used! :twak:
Crossbars.. depends on what the rest of the truck looks like. Personally, I wouldn't put anything dented or scratched on my truck. Then again, I only buy from dealers so normally don't have that problem.
Microday
06-21-2007, 01:57 AM
[quote=jmsspratlin] I am havving mixed feelings about some I purchased from a guy, however they have several dents and scratches on them. quote]
What does the rest of your truck look like? Dents and scratches. If it was me I would see the dents everytime I looked at them.
I think you have another issue....did the seller represent the crossbars accurately? If no then I wouldn't compromise now that you have them.
jmsspratlin
06-21-2007, 02:10 AM
[quote=jmsspratlin] I am havving mixed feelings about some I purchased from a guy, however they have several dents and scratches on them. quote]
What does the rest of your truck look like? Dents and scratches. If it was me I would see the dents everytime I looked at them.
I think you have another issue....did the seller represent the crossbars accurately? If no then I wouldn't compromise now that you have them.
No, they were to be in good condition without dent and scratches (or else hell, I wouldn't have bought them) It was said that UPS must have damaged them in transit. Look at the fu*king box! Thats how they came...barley hanging out the end and no protection inside to keep them seperated and from banging the hell outta one another. Needless to say, the guy offer half my money back(which I have not yet seen) and would leave me paying $75 for these things. My thinking is, pack them up like they came, send them back like they came and use that on a set of brand new ones. I'm not going to submit any names on here though....unless I wind up getting screwed...then IT's ON!:twak:
mikejr
06-21-2007, 02:43 AM
is there any way to orient them so that you wouldnt see the defects? Like someone else said, i'd see it every time i looked at the truck since i would know its there....BUT....would anyone else notice it if they didnt know its there? Probably not unless they were quite tall perhaps?
jmsspratlin
06-21-2007, 02:52 AM
is there any way to orient them so that you wouldnt see the defects? Like someone else said, i'd see it every time i looked at the truck since i would know its there....BUT....would anyone else notice it if they didnt know its there? Probably not unless they were quite tall perhaps?
Yeah, its noticiable:(
jmsspratlin
06-21-2007, 03:11 AM
Is there anywhere online I can order a set from? I have looked but apparently in the wrong places. The new onews are listed for $450 new on ebay for the chrome ones (which are the ones I want).
dеiтайожни
06-21-2007, 03:20 AM
$379.44 @ gmaccessoriesstore.com
http://gmaccessoriesstore.com/roofmounted-luggage-cross-rail-package-bright-p-4424.html?cPath=426_427_428_429
My brand new still in box from dealer silver crossbars will be on ebay for $300 in a week or so.
jmsspratlin
06-21-2007, 03:22 AM
$379.44 @ gmaccessoriesstore.com
http://gmaccessoriesstore.com/roofmounted-luggage-cross-rail-package-bright-p-4424.html?cPath=426_427_428_429
My brand new still in box from dealer silver crossbars will be on ebay for $300 in a week or so.
Why not sell them to me now?:beerchug:
Goalkeeper
06-21-2007, 03:32 AM
Just put a Gobi Rack on them and I bet the scratches and dents won't be that noticable...
Good luck either way - if you do get screwed, post all the details of the mope...
-matt
jmsspratlin
06-21-2007, 03:32 AM
Also, are those the ones that are considered "chrome"?
jmsspratlin
06-21-2007, 03:35 AM
Just put a Gobi Rack on them and I bet the scratches and dents won't be that noticable...
Good luck either way - if you do get screwed, post all the details of the mope...
-matt
Oh believe me, I have been burned online many of times. I have developed an "attitude" when it comes to bad deals. I will not sell the person out nor will I say any names. I don't want to ruin business for the person. I do feel the person will make things right. They seem to be good people.:o
dеiтайожни
06-21-2007, 03:35 AM
Why not sell them to me now?:beerchug:
Meh... I already took pictures and wrote the description up. Seems like a waste not to put it on the eBay.
http://i94.photobucket.com/albums/l89/blackh3/h2bars_1Medium.jpg
http://i94.photobucket.com/albums/l89/blackh3/h2bars_2Medium.jpg
jmsspratlin
06-21-2007, 03:38 AM
Just trying to save you the trouble...hell I even live in Florida as well, so shipping shouldn't be bad. If your looking for the highest bidder, then I understand, if you are that determined to sell on egay, then I will order the ones from the site link in the morning. Thanks anyway....Jamie
dеiтайожни
06-21-2007, 03:46 AM
I was kidding. ;)
jmsspratlin
06-21-2007, 03:49 AM
I was kidding. ;)
Shot you a PM, do you want to rid yourself of them now or do you need to wait? :D
Microday
06-21-2007, 03:55 AM
Jamie, I just bought a second set to make two light bars. They just arrived today. You have been pretty active on the board and upgrading to Chrome pieces. What do you have to trade?
I have Desert Sand and can't decide Chrome, Black, or Black Chrome so I have a collection of all. Just got Black Side Steps and Black Wrap around brush guard today as well.
I have $285 in my set and willing to trade for equal value. I can sell but they are used but look awesome.
jmsspratlin
06-21-2007, 04:06 AM
Jamie, I just bought a second set to make two light bars. They just arrived today. You have been pretty active on the board and upgrading to Chrome pieces. What do you have to trade?
I have Desert Sand and can't decide Chrome, Black, or Black Chrome so I have a collection of all. Just got Black Side Steps and Black Wrap around brush guard today as well.
I have $285 in my set and willing to trade for equal value. I can sell but they are used but look awesome.
I would consider a trade. I'm not sure I might have that you would want though. First off, could you guarantee they are in great condition without damage? Secondly, what would we be looking at with shipping? And thirdly, could you get some pics up? Thanks man....Jamie
timgco
06-21-2007, 04:08 AM
IT sounds to me like UPS wrecked this deal for you. It would seem (and I'm sure UPS will claim) that this was packaged insufficiently. Those are hard to ship. I have shipped three sets. Two of those sets had the factory foam blocks and box to ship them in so they were OK, the last set, the corners got smashed in because I shipped them in a "custom" box. Even though I made the damn box near bullet proof, UPS still wrecked the deal. DAMN UPS! So, I can relate to what that seller is going through with you.
Now for the best possible thing you can do:
I honestly think you should take the bars off and put a polished stainless GOBI rack up there. ;) That's some serious BLING! :D No rust since it's stainles. It;s polished and looks like chrome!
The rack sits the same height as the factory bars too.
jmsspratlin
06-21-2007, 04:10 AM
I also have:
5 chrome H2 rims
5 silver H3 rims
chrome H2 grille
chrome H3 grille
chrome H2 tube steps
H3 monsoon subwoofer
ipcw smoked H2 cab lights
recon smoked H2 cab lights
ipcw smoked H2 side markers
ipcw smoked H2 turn signals
custom H2 tail light blackouts
All like new... need anything else? :D
So where the hell were you when I was asking...pleading for a chrome step rails? I already have some, but I do need the drives side one. The one I have has some scratches on it (one again the victim of drop shipping). Would you consider getting rid of one? Oh, and is it scratched...anywhere? I also need the chrome mini grill...got one? As well as a OEM chrome wrap brush guard. Let me know.....Jamie
Microday
06-21-2007, 04:12 AM
I would consider a trade. I'm not sure I might have that you would want though. First off, could you guarantee they are in great condition without damage? Secondly, what would we be looking at with shipping? And thirdly, could you get some pics up? Thanks man....Jamie
Guarantee - Yes...my reputation on this board and pictures. My ebay is Microday with 61 positives.
Shipping they are really light...have no idea.
Pics...tomorrow I will PM
Trade - What do you have? H2 only. I would like Black parts, black chrome. Trailer Convenience package or the rubber hitch covers and extention. SUT Rubber Mat. Newer floor mats, interior items. Paintable Parts.
jmsspratlin
06-21-2007, 04:16 AM
Guarantee - Yes...my reputation on this board and pictures. My ebay is Microday with 61 positives.
Shipping they are really light...have no idea.
Pics...tomorrow I will PM
Trade - What do you have? H2 only. I would like Black parts, black chrome. Trailer Convenience package or the rubber hitch covers and extention. SUT Rubber Mat. Newer floor mats, interior items. Paintable Parts.
Only thing I have to offer as far as that would be the black hood latches, and black hood handles. They are the stock ones though. I have the SUV, so some of my things may differ a little.
frenzy1
06-21-2007, 06:44 AM
Those sure are damaged !!
I have two brand new ones that I don't used. Should have gotten mine.
good luck !
frenzy
jmsspratlin
06-21-2007, 11:18 AM
Those sure are damaged !!
I have two brand new ones that I don't used. Should have gotten mine.
good luck !
frenzy
Maybe if you were not on the other side of the world I would have:giggling: :D :D
johndjmix1
06-21-2007, 03:59 PM
jmsspratlin (http://www.elcovaforums.com/forums/member.php?u=6912)....
I could use the damaged ones (At least 1 of them) for a project. How much would you let one go for?
--John vbmenu_register("postmenu_405633", true);
jmsspratlin
06-21-2007, 07:12 PM
jmsspratlin (http://www.elcovaforums.com/forums/member.php?u=6912)....
I could use the damaged ones (At least 1 of them) for a project. How much would you let one go for?
--John vbmenu_register("postmenu_405633", true);
I paid $150, i plan to get that back to apply to a new or newer set. If interested, please let me know.....Jamie
timgco
06-21-2007, 07:16 PM
G O B I
DennisAJC
06-21-2007, 08:24 PM
Jamie,
They look brand new to me!:clapping:
I'd give you mine but I don't think you'd want them.
MarineHawk
06-21-2007, 08:38 PM
The rack sits the same height as the factory bars too.
Timcgo, is that the stealth rack you are referring to? It sits at the same height as a factory bars? I've never seen one in real life. I just squeeze into my parking garage as it is. If it's no taller than the racks at any point, I might get one.
timgco
06-21-2007, 09:38 PM
Timcgo, is that the stealth rack you are referring to? It sits at the same height as a factory bars? I've never seen one in real life. I just squeeze into my parking garage as it is. If it's no taller than the racks at any point, I might get one.
yep, stealth rack.
Unless you have the tbars cranked up on your truck, it will sit the same height as a stock H2 with the factory crossbars.
now on teh flip side of that, if you have air. susp. make sure it is not engaged. The non-air susp. sit a ttad lower in teh back.
What is the exact height restriction you are dealing with and how do you enter/ exit the garage (flat, downhill, uphill)
jmsspratlin
06-21-2007, 09:56 PM
Jamie,
They look brand new to me!:clapping:
I'd give you mine but I don't think you'd want them.
I swear to you, they are not. I guess I will order from the GM dealer since I have not heard from the guys on here anymore about selling them. :crying:
jmsspratlin
06-21-2007, 10:53 PM
Just called the local GMAC dealer to see if they would price match the online price, they said the site had to be a phoney site and that the bars are the same price everywhere. I said ok...and hung up. :fdance:
johndjmix1
06-21-2007, 11:32 PM
jamie....was that price for 3? I only need 1, would you let one go for for $50?
--John
Humm_MeSUT
06-22-2007, 12:29 AM
I have a set I'm not using that are still in great shape and right down the road. If you want them we could meet up sometime and if you like them just make a reasonable offer.
Microday
06-22-2007, 01:58 AM
I have a set I'm not using that are still in great shape and right down the road. If you want them we could meet up sometime and if you like them just make a reasonable offer.
Best offer yet!!!!
I would jump on these
jmsspratlin
06-22-2007, 04:21 AM
I have a set I'm not using that are still in great shape and right down the road. If you want them we could meet up sometime and if you like them just make a reasonable offer.
Sounds good. Where are you located? Would Sat evening or afternoon be too soon? They are not dented or scratched up are they? Also, they are the "chrome" looking ones right? If you are sure, PM me and I'll shoot you my phone # and we'll go from there. Thanks a mil.....Jamie:beerchug:
jmsspratlin
06-22-2007, 04:23 AM
Best offer yet!!!!
I would jump on these
Hey man, what happened to the ones you said you had for sale? Did you decide against it? Just curious since I didn't hear back from you.....Jamie
jmsspratlin
06-23-2007, 03:52 PM
HEY GUYS!
Check out the "Beware of this forum member" thread. This is the guy that is screwing people over. Like I stated earlier, I hate to blast the guy, but when you start messing over multiple individuals...then something has to be said....and I guess I'm that guy.:rant:
vBulletin v3.0.7, Copyright ©2000-2025, Jelsoft Enterprises Ltd.