PDA

View Full Version : Locker Button Part Number?


Sundown94
05-25-2012, 03:17 AM
Anyone know the part # for the round locker button that is above the transfer case select buttons? With 130K miles on my '03, many lights are failing on my dash and I decided to start replacing them. I found the part #s for the steering wheel controls, transfer case select buttons, HVAC control unit, etc., but nothing for the round locker button as of yet (I did try several searches in the forum, but maybe I didn't describe it correctly).
Thanks!

[__--MUD--__]
05-25-2012, 03:21 AM
all those buttons are a single assembly.

http://parts.nalleygmc.com/showAssembly.aspx?ukey_assembly=392260&ukey_make=1027&ukey_model=14605&modelYear=ALL&ukey_category=19401&ukey_driveLine=0&ukey_TrimLevel=0&ukey_modelRange=0&searchString=

If you can half ass soder- disassemble it and replace the light.

Sundown94
05-25-2012, 03:50 AM
Thanks! I thought that might possibly be the case, but then I also thought that the locker was an option back in '03 and therefore the button not included on all models (i.e., not part of the transfer case select assembly). Thanks for the clarification, and for replying so quickly!!

Sundown94
05-25-2012, 03:54 AM
BTW, I can actually solder fairly well, but have no idea what size bulb it is or where to even get one of those tiny bulbs. If I could find the bulbs, I would try fixing my steering wheel switches on my own since I am already on the 3rd set of those too. Do you know where to find the bulbs?

glennf1
05-26-2012, 01:49 AM
Are you sure the locker button even lights up? I thought I heard somewhere that it's not lit.

HummerMann
05-26-2012, 01:59 PM
The little dots on them light up amber when selected and the neutral transfer case disengaged light is red.

twinmill28
05-26-2012, 07:06 PM
Bulbs should be obtainable at Radio Shack. The stupid heater control panel bulbs have started going out on my minivan, and as embarrassing as it is to say, I got on some minivan forum and that was their solution---solder in new bulbs vs. replacing the panel. They'd listed the part number and suggested replacing all bulbs at once.