Express Sunroof WORKS!

[LasVegas]

I've noticed some interest in the express sunroof on some of the newer H2 for '03's. Here's a link to a product that may work if any are interested.

http://www.autoloc.com/detail.lasso?itemid=WC1000 Talk to Tom @ ext 312

Got it today, installed & works GREAT! One touch & it opens all the way. One touch & it closes. One more touch & it tilts open. Just touch anywhere while it's traveling & it stops there. Great upgrade for only $40 bucks plus shipping. Here's pics & some hints to shorten install time. Oh I need to add to the install instructions the processor is small enough to just lay inside the overhead console. Enough foam it won't rattle. <span class="ev_code_RED">My H2 is an '03. Confirm the wiring in your H2 is the same before making connections.</span>
<span class="ev_code_RED">
Install revised 3/20/05. The following is current</span>

[LasVegas]

I've noticed some interest in the express sunroof on some of the newer H2 for '03's. Here's a link to a product that may work if any are interested.

http://www.autoloc.com/detail.lasso?itemid=WC1000 Talk to Tom @ ext 312

Got it today, installed & works GREAT! One touch & it opens all the way. One touch & it closes. One more touch & it tilts open. Just touch anywhere while it's traveling & it stops there. Great upgrade for only $40 bucks plus shipping. Here's pics & some hints to shorten install time. Oh I need to add to the install instructions the processor is small enough to just lay inside the overhead console. Enough foam it won't rattle. <span class="ev_code_RED">My H2 is an '03. Confirm the wiring in your H2 is the same before making connections.</span>
<span class="ev_code_RED">
Install revised 3/20/05. The following is current</span>

[HUMMERcustoms.com/TAZ]

Thanks Vegas
My 05 does not have express sunroof. Post any other info You find out.

TAZ

[RAM H2 RYDER]

I'm interested too, my 05 does not have an express sunroof.

[intimidator]

i am a gm tech. i whent on techline and checked 03' 04' and 05.none have express sunroofs. the sunroof mentioned in the other thread probobly is not factory.

[89vette]

I have an 05 and it has express open and express close so the techline is wrong. My 05 was built in October. It was delivered to the dealer and I brouhgt it home the day after it arrived. I must have a fluke or something.

[timgco]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by 89vette:
I have an 05 and it has express open and express close so the techline is wrong. My 05 was built in October. It was delivered to the dealer and I brouhgt it home the day after it arrived. I must have a fluke or something. <HR></BLOCKQUOTE>

my 05 SUT has this also.

[LasVegas]

So vette & tim. Just in case I decide to try this mod, one touch closes the roof and if you touch it again it does the tilt open?? I'm pretty sure the product I found will work for open/close but just wondering about the tilt open part with express.

[H2 SVO]

Okay...so I am feeling left out...

I have a 05 SUV and one of the first bitches I had was that the sunroof did not have an express open or close. Its a pain it the ass since it is quite a large sunroof and takes a LONG time to open and close while you are waiting there.

Is this somthing I am suppose to have??

My 02 Denali had an express open sunroof and I thought it was kinda odd that the H2 didnt.

[intimidator]

so i take it that the sunroofs are factory.i had my parts guy compare parts from 03'04and05 the only difference was that in 05 they changed the motor and sunroof control module.but if i go to tecline and check the description and operation and repair procedures there is no mention of an express open option?

[89vette]

Yes mine is factory. In Express close mode, if you simulate getting your head caught in the opening, it will reverese and go all the way open.

Las Vegas, since mine is factory I'm not sure how to answer your questions.

[LasVegas]

Checked with AutoLoc this morning. They talked with their tech support and assure me this will work with our sunroofs. Also, the little processor is only about 1" thick so hopefully it will fit inside the roof console making a very easy install. I ordered one and will post the results with install info later this week.

[KenP]

intimidator, If I read your post correctly, I should be able to purchase the module and switch for some '05's and change them with the ones on my '03 and have an express roof. Is that correct?

[LasVegas]

Ken...you might want to look at this product before going there. I think it will work without changing modules, etc. http://www.autoloc.com/detail.lasso?itemid=WC1000

I'm installing this week.

[intimidator]

ken that would be a sunroof control module and a motor. the switch hasn't changed since 03.

[KenP]

Jonahs, let us know how the install goes.

[H2 Bill]

We are all eagerly waiting!! Sounds great. http://www.elcova.com/infopop/emoticons/icon_smile.gif

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by H2 Bill:
We are all eagerly waiting!! Sounds great. http://www.elcova.com/infopop/emoticons/icon_smile.gif <HR></BLOCKQUOTE>

It's shipped. Should be here tomorrow or Thurs. Let you all know how the install goes & if it works. http://www.elcova.com/infopop/emoticons/icon_cool.gif

[H2 Bill]

Hey LasVegas did you get the module today? Looking forward to see how it turns out.

[LasVegas]

Got it & installed. See 1st post above for pics/install. Works GREAT!

[DennisAJC]

You da man! Thanks buddy. I'm sold.

[KenP]

I think I need to get it. Oh, can someone who can't wire lights do it? http://www.elcova.com/infopop/emoticons/icon_confused.gif

[LasVegas]

Hell Ken, I identified all the wires for you. Tell ya what. Drive it here and I'll do it for you. http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[KenP]

True, true. Maybe I should look at it in the morning. After a glass of OJ, not Beer. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[LasVegas]

What I don't understand is this is sooo simple....just a $5 circuit board that senses the higher electrical load when the window/sunroof stops & then disconnects. Hummer could probably include it in the module or switch for $1.00 Go figure http://www.elcova.com/infopop/emoticons/icon_confused.gif

[H2Finally]

Great job LV! Gotta get me that asap...

[finbox]

OK, I might of missed this ....but will it work on a 2004? If so I'll order one today!

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by finbox:
OK, I might of missed this ....but will it work on a 2004? If so I'll order one today! <HR></BLOCKQUOTE>

Work on any model/year

[H2 Bill]

Thanks for all of the info LasVegas! I ordered mine this morning and if you guys have any questions call and talk to Tom at Ext. 312. He was very helpful as I told him what we were doing and he would probably have several calls from the H2 Forum.

[LasVegas]

Yeah Bill, Tom's a real nice guy. Talked with him this morning & warned him he's probably going to get lot's of orders on this item. He assured me he'll keep plenty in stock for us. They appreciate our business.

[HUMMERcustoms.com/TAZ]

Well Vegas what the heck is going on with You. The detail of instruction for this instalation is way below Your normal instruction quality. I mean You have a whole herd us of that have come to expect a much more from you. http://www.elcova.com/infopop/emoticons/icon_wink.gif May i suggest that even though a child should be able to figure out what You have discovered for us that perhaps You post another thread to cover the install in more of a step by step to help make the job even more easy. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_wink.gif
But, I leave it to You as to whether You can tolerate the poorer quality instruction. I'm not saying bad instruction but poorer compared to You normal level. http://www.elcova.com/infopop/emoticons/icon_wink.gif I can live with it if You can. Many thanks for the effort to solve this problem. I ordered Mine today so I have 5 to 7 days to wait on it so that gives You time to improve the instalation directions.
Thanks for all Your effort and help!!!
I also talked to Tim he is ready for everyone.
http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_wink.gif
TAZ


<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by LasVegas:
I've noticed some interest in the express sunroof on _some_ of the newer H2 for '03's. Here's a link to a product that may work if any are interested.

http://www.autoloc.com/detail.lasso?itemid=WC1000

Got it today, installed & works GREAT! One touch & it opens all the way. One touch & it closes. One more touch & it tilts open. Just touch anywhere while it's traveling & it stops there. Great upgrade for only $40 bucks plus shipping. Here's pics & some hints to shorten install time. Oh I need to add to the install instructions the processor is small enough to just lay inside the overhead console. Enough foam it won't rattle. <HR></BLOCKQUOTE>

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by RLTAZH2:
Well Vegas what the heck is going on with You. The detail of instruction for this instalation is way below Your normal instruction quality. I mean You have a whole herd us of that have come to expect a much more from you. http://www.elcova.com/infopop/emoticons/icon_wink.gif <HR></BLOCKQUOTE>

Well TAZ. Maybe you better order the "Canadian" version (p/n 1000 DA) along with Dennis. Go here for info. http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://elcova.com/groupee/forums?a=tpc&s=2826088551&f=5106011751&m=4491037201

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by sfox:
.......BTW we don't have a sunroof so I have no vested interest in this.

S <HR></BLOCKQUOTE>

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_cool.gif

[mmayo]

THANKS!!! Ordered mine!

[finbox]

Thank You, just ordered mine as well.

[HUMMERcustoms.com/TAZ]

OOOHH OK Vegas Now that is better. I think I can follow those instructions. I like the kind of instructions where You just rip it out and do not have to put any of back. Simplicity that's the ticket.
TAZ

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by LasVegas:
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by RLTAZH2:
Well Vegas what the heck is going on with You. The detail of instruction for this instalation is way below Your normal instruction quality. I mean You have a whole herd us of that have come to expect a much more from you. http://www.elcova.com/infopop/emoticons/icon_wink.gif <HR></BLOCKQUOTE>

Well TAZ. Maybe you better order the "Canadian" version (p/n 1000 DA) along with Dennis. Go here for info. http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://elcova.com/groupee/forums?a=tpc&s=2826088551&f=5106011751&m=4491037201 <HR></BLOCKQUOTE>

[Fever]

Hey LV you should ask for your money back for all the business you sent them http://www.elcova.com/infopop/emoticons/icon_cool.gif I ordered mine today http://www.elcova.com/infopop/emoticons/icon_biggrin.gif By the way GREAT job on the instructions that will help alot. Maybe you could talk to Warn http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[LasVegas]

Anyone else got their "gadget" & installed yet? Just curious if you're as happy with it as I am.

[H2 Bill]

I just got mine about 5 mins. ago! I will install it tonight and let you know how it goes.
Thanks Jonahs

[intimidator]

hey vegas great install the only problem i see is that if you have a problem with the sunroof while under warranty it gives the dealer an out.and i know those sunroof repairs can get very expensive.so to solve this problem i would try to connect the module in a manner so that it can be removed easily if you have a sunroof problem. just my 2 cents.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by intimidator:
hey vegas great install the only problem i see is that if you have a problem with the sunroof while under warranty it gives the dealer an out.and i know those sunroof repairs can get very expensive.so to solve this problem i would try to connect the module in a manner so that it can be removed easily if you have a sunroof problem. just my 2 cents. <HR></BLOCKQUOTE>

Correct, but after installing this it would be about a 10 minute job to remove it.

[H2 Bill]

Just installed it!! It works great! It took all of 20 minutes after I figured out that the console has phillips screws and not torx!
Thanks again LasVegas, this was a great find.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by H2 Bill:
Just installed it!! It works great! <HR></BLOCKQUOTE>

Glad you like it. Really a http://www.elcova.com/infopop/emoticons/icon_cool.gif upgrade for little money plus easy install.

[finbox]

Las Vegas,

With your mod will it open to the first stop or all the way open?

Thanks,

Finbox

[LasVegas]

Opens all the way. If to touch while it's traveling it stops there.

[H2 Bill]

Mine actually opens to the first stop and then one more touch all the way open. http://www.elcova.com/infopop/emoticons/icon_smile.gif Mine's an '03.

[89vette]

That is how the factory one in the 05 works. Damn I felt special driving an 05 with this mysterious feature. You guys are ruining this for me http://www.elcova.com/infopop/emoticons/icon_wink.gif

[H2 Bill]

'89 anything to ruin your day!

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by 89vette:
You guys are ruining this for me http://www.elcova.com/infopop/emoticons/icon_wink.gif <HR></BLOCKQUOTE>

hehehehehehehehe http://www.elcova.com/infopop/emoticons/icon_cool.gif

[mmayo]

Great mod!!! Got mine yesterday & installed it this morning - piece of cake!!!

[Mike (by the beach)]

Thanks for the great find -- I got it from ebay for $30 + $6 shipping.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by H2 Bill:
Mine actually opens to the first stop and then one more touch all the way open. http://www.elcova.com/infopop/emoticons/icon_smile.gif Mine's an '03. <HR></BLOCKQUOTE>

That's really strange Bill. I read my '03 manual & it talks about the first "convenience" stop but mine has never had that and most don't as far as I know. I wonder if yours was a late year '03 with some '04 features?? Still doesn't explain what's in my manual. That's Hummer...like nothing else! http://www.elcova.com/infopop/emoticons/icon_wink.gif

[H2 Bill]

Actually mine is an early '03 I bought it in July of '02. VIN 913.

[Fever]

Hey Bill I have an 04 and it has the different stop positions. Didn't know it till I read this post. Tried it last night on the way home it goes back further each time you hit the button. I will be installing my auto-loc this afternoon I will see where it stops.

[Fever]

Just put it in and works great. Thanks again LV great find http://www.elcova.com/infopop/emoticons/icon_biggrin.gif. Bill it still stops at 1st convenience stop press again and goes to second stop.

[H2 Bill]

FEVER, that's exactly what it's supposed to do! It is a very cool and inexpensive mod. http://www.elcova.com/infopop/emoticons/icon_smile.gif

[LasVegas]

Fever & Bill. This really has me stumped. See my prior post where my manual says there are "convenient stops" but mine has never done that. Do you suppose it's a programming thing???? Any ideas from anybody would be appreciated.

[PARAGON]

Sunroof Description and Operation
Power Sunroof System Components
The power sunroof system is a tilt/slide style, consisting of the following components:

Sunroof actuator, control module included
Sunroof switch
Sunroof window
Sunshade
The rail and track assembly upon which the sunroof window rides
Power supply for the sunroof actuator motor and Retained Accessory Power (RAP) relay: SUNROOF 25 A fuse
Ground G203
Power Sunroof Operation
The power sunroof will operate with the ignition switch turned to Accessory or RUN. Once the ignition switch is turned to OFF, from RUN, the sunroof will continue to operate until any door is open or when the Retained Accessory Power (RAP) has timed out. For a complete description of the RAP operation, refer to Retained Accessory Power (RAP) Description and Operation in Retained Accessory Power.

Use the rocker type sunroof switch to command the sunroof to :

Open
Closed
Vent
Pressing the sunroof switch rearward, the sunroof window will slide from:

Vent position to the closed position
Closed position to the open position
Pressing the sunroof switch forward, the sunroof window will slide from:

Open position to the closed position
Closed position to the vent position
To Slide Open
The slide open function will work when the sunroof window is in the closed or partially open position. To slide open the power sunroof, press and hold the sunroof switch rearward. This will apply an input to the sunroof actuator motor from the sunroof switch open contacts through the sunroof switch open signal circuit. The constant input, allows the sunroof actuator motor to control the opening of the sunroof window. From the closed position the sunroof window will lower slightly, then slide open, rearward, with the sunroof sunshade between the roof and the headliner, stopping at the comfort stop position.

From the comfort stop position, an open request will slide the sunroof window approximately (1 in) 2.54 cm further open. The next open request will slide the sunroof window completely to the full open position.

To Close
To close the power sunroof from the:

Open position -- press and hold the sunroof switch forward. This will apply an input to the sunroof actuator motor from the sunroof switch close contacts through the sunroof switch close signal circuit. The sunroof switch close input at the sunroof actuator motor needs to be constant, switch pressed, allowing the sunroof actuator motor to control the motor to drive the sunroof window forward, until it reaches the closed position. To close the sunshade, this will have to be manually slid closed.
Vent position -- press and hold the sunroof switch rearward. This will apply an input to the sunroof actuator motor from the sunroof switch open contacts through the sunroof switch circuit. The sunroof switch open input to the sunroof actuator motor needs to be constant, switch pressed, to allow the motor to tilt the sunroof window down to the fully closed position.
To Vent Open
To open the power sunroof to the vent position from the closed position, press and hold the sunroof switch forward. This will apply an input to the sunroof actuator motor from the sunroof switch close contacts through the sunroof switch close signal circuit. The sunroof switch close input to the sunroof actuator motor needs be constant, switch pressed, to allow the sunroof actuator motor to control the motor to tilt the rear of the sunroof window upward to the vent position.

Limit Switches
The limit switches are within the sunroof actuator motor and supply data. The multiple data combinations allow the sunroof actuator motor to track the position of the sunroof window.

Sunroof Actuator Motor
The sunroof actuator motor contains the logic and is serviceable as one unit.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by PARAGON:

Limit Switches
The limit switches are within the sunroof actuator motor and supply data. The multiple data combinations allow the sunroof actuator motor to track the position of the sunroof window.

Sunroof Actuator Motor
The sunroof actuator motor contains the logic and is serviceable as one unit. </div></BLOCKQUOTE>

Thanks P. Now I'm really confused. http://www.elcova.com/infopop/emoticons/icon_confused.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[DICK-M]

After reading your information I bought one these units and wanted to have a Shop install it, but they gave some crud about Auto-Loc's instructions. So I printed out your instructions and did it my self in less then a 1/2hour and it worked Great. So Thank You Very Much for your Great Direction.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> wanted to have a Shop install it, but they gave some crud about Auto-Loc's instructions </div></BLOCKQUOTE>
You're welcome & I'm not sure I'd go back to that shop. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[rvs9]

Where did you position your new control module in the overhead console? I have my XM radio tuner mounted in the front of my console and sits in a cut-out on the console. I guess what I am saying is that the front space of my console is taken up and am not sure if I will have room for the module.

[hummerNCO]

Lost Wages, I wouldn’t worry too much about the “convenience” stops. You might even call them inconvenience stops. The first stop is about 3 inches from full open and the second is about 1 inch from full open. Now I could see if the first stop was 1/3 way and second was half way… that would be nice.

Now watch, everyone else’s probably does work that way and mine is just F’ed up.

Anyhow, I think after reading these posts, I’ll get one of these things. I hate holding my arm up for more than 3 seconds… it makes me sooo dizzy.

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rvs9:
Where did you position your new control module in the overhead console? I have my XM radio tuner mounted in the front of my console and sits in a cut-out on the console. I guess what I am saying is that the front space of my console is taken up and am not sure if I will have room for the module. </div></BLOCKQUOTE>

The module is about 3" x 1" & I just layed mine inside the console. There should be room but if not you could mount it up inside the roof area where the motor's located (see my install pics this post)

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by hummerNCO:
Lost Wages, I wouldn’t worry too much about the “convenience” stops. You might even call them inconvenience stops. The first stop is about 3 inches from full open and the second is about 1 inch from full open. Now I could see if the first stop was 1/3 way and second was half way… that would be nice.

Now watch, everyone else’s probably does work that way and mine is just F’ed up.

Anyhow, I think after reading these posts, I’ll get one of these things. I hate holding my arm up for more than 3 seconds… it makes me sooo dizzy. </div></BLOCKQUOTE>

You're right. The more I've thought about it I'm just as glad it doesn't do the convenient stop thing.

[rvs9]

Thanks LasVegas. Just ordered mine. As I do not keep alot of electrical doo-dads around the house, what materials will I nned in addition to wire cutters and electrical tape (i.e. # of quick clamp-on connectors, etc..)?

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rvs9:
Thanks LasVegas. Just ordered mine. As I do not keep alot of electrical doo-dads around the house, what materials will I nned in addition to wire cutters and electrical tape (i.e. # of quick clamp-on connectors, etc..)? </div></BLOCKQUOTE>
That's about it. 1/2 dozen clamp connectors should do it. Real easy install. You'll like it.

[HUMMERcustoms.com/TAZ]

Jonahs
Got mine installed and works perfectly on 2005.
My first stop is as mentioned previouly. 3" from open and then touch it and it opens the rest of the way. Weird
Thanks
TAZ

[JMV1210]

Las Vegas,
Put mine in today and it works well, but I noticed when it moves to auto close, it stops before it gets all the way in and does not seal. In fact when it opens it open relatively fast, but on close it’s slow.... If I assist the sunroof with my hand by applying pressure the sunroof will close all the way and seal.
Thoughts?

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by JMV1210:
Las Vegas,
Put mine in today and it works well, but I noticed when it moves to auto close, it stops before it gets all the way in and does not seal. In fact when it opens it open relatively fast, but on close it’s slow.... If I assist the sunroof with my hand by applying pressure the sunroof will close all the way and seal.
Thoughts? </div></BLOCKQUOTE>I assume you are certain this didn't exist before installing the express module. If not, say so. With that said, the only thing that might cause this is low voltage/current - poor connections. The only other possibility would be a defective module but I doubt that. I would start by checking the wiring sequence per my install wire colors & their instructions. Be certain the correct wires are on the correct side i.e. motor side - switch side. Then I would check ALL the connections you made for good solid contact. Redo them if necessary. Did you use quick connectors? They can be a little tricky. If that doesn't correct the problem, bypass the AutoLoc system and see if it's still slow closing. If it isn't at least you've isolated the problem to the AutoLoc (or your install). You'll need to resolve this because continued use at low voltage/current can damage the motor. Nobody else has experienced this problem. Let me know what you find.

[LasVegas]

MNV1210 ... I've checked the sunroof wiring diagram and don't really see how the AutoLoc could cause the problem you're describing. Do the things above and let me know. Here's the wiring diagram.

[tower]

Dear JMV210,

I haven't put one of these in, but will order one today. But it sounds like you are having a resistance problem. This could come from a few places. The sunroof might need lubrication or have a loose or bent part. There could be dirt or crushed leaves in the mechanism. The sensitivity on the WC1000's load sensor might be set too high or faulty. Not having seen one, I don't know if it is adjustable. You may want to ask the manufacturer. Otherwise, just tell them it is defective and ask for a replacement.


Dear LV,

Great installation detail. Thanks! Saves us all a lot of time & stress.

t~

[HUMMERcustoms.com/TAZ]

When I intially installed mine i had trouble with it opening but would close well. I did as Vegas said and went back with a meter and checked voltage at connections and the open side voltage would vary as I moved wire around. Rewired and worked perfect. The way it acted and having just installed i suspected My work first. The quick connects have for Me always been problamatic and I tossed them and went with inline connect to assure I had connections and all is OK.
TAZ

[tower]

Dear Taz,

Thanks for clarifying and owning up. This helps, since I just ordered mine. That Vegas guy, he's alright, huh?

t~

[LasVegas]

<span class="ev_code_RED">Minor revision to wiring installation. See first post of this thread. For those that have installed per first instructions you do not have to change unless you want to. Will work fine as wired.</span>

[HUMMERcustoms.com/TAZ]

I'll put it this way tower. There are only about 6 or 8 guys on this site that I would do something the exact way they told Me to with out guestion and if they were not sure they would send Me to one of the others to ask them.
Jonahs is top draw in any of Our books who have come to follow His directions. Follow it as He describes and do not deviate unless You discover a particular problem isolated to Your situation. Then when that happens let Vegas know He will look into it or post and one of the others will already know or they will look it up. I would not list them myself as I would be afraid to leave someone out but, by the time You follow this site for 6 months You will see who to pay attention to. But, right now you asked about Vegas and listen to Him if he finds a better way he will revise which i notice He just did on sun roof install. So there you go My opion and until proven different I'l follow My on advice.
TAZ (Rick)

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by tower:
Dear Taz,

Thanks for clarifying and owning up. This helps, since I just ordered mine. That Vegas guy, he's alright, huh?

t~ </div></BLOCKQUOTE>

[H2Finally]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by LasVegas:
<span class="ev_code_RED">Minor revision to wiring installation. See first post of this thread. For those that have installed per first instructions you do not have to change unless you want to. Will work fine as wired.</span> </div></BLOCKQUOTE>Vegas, is the Tan switched? Is the orange garage opener power always ON?

[LasVegas]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by H2Finally:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by LasVegas:
<span class="ev_code_RED">Minor revision to wiring installation. See first post of this thread. For those that have installed per first instructions you do not have to change unless you want to. Will work fine as wired.</span> </div></BLOCKQUOTE>Vegas, is the Tan switched? Is the orange garage opener power always ON? </div></BLOCKQUOTE>H2Finally....The Tan wire to your sunroof is switched. The garage door transmitter wire is always hot. But you still couldn't operate the sunroof with the ign off (except during RAP power) because the module/motor is not powered. Your AutoLoc would only be sending a signal to an unpowered module/motor.

[HUMMERcustoms.com/TAZ]

Hate to brag but My point proven by DA MAN Himself Las Vegas or by His friends
Jonahs The Great. And yes Jonahs I exepect brownie points but they are honest points as this is the advice i would give even in private to any who asked.
Thanks Jonahs and You other 6 or more and you now who You are and you all receive acolades at various times. This includes You to DRTY.
TAZ (Rick)

[LasVegas]

Thanks TAZ. Help is what forums are all about. BTW, I emailed you a link to a great site I found for auto electrical parts up in Reno. Should have everything you need for your light bar project and any future elecrical projects.

[H2 Bill]

I wonder if you are working it with your engine off. A couple of times this has happened to me and then I would start the engine and it would work fine.

[HUMMERcustoms.com/TAZ]

Got it Jonahs and thanks. I have not had time to sit down and look it over but, you can bet when i get home from all the meetings today I will during the night. It is raining and ugly here today.
I'm having to drive My Baby in the rain today as My 99 Silverado is in detail since Friday. I do not rush Fred. Has got to be the best detail man I have ever used. He is finished but will not let Me come and get it in the rain. He said I can have it when sun comes out. I said Fred Your making Me drive My baby in the rain. He said well I take care of that when You come to get truck just leave H2 for the day and I'll get it right on the house.
Where and how many times do you find a guy like that. He takes as much pride in My H2 looks as i do. when i come every week for a hand wash he grills Me i fHe sees something He does not like. sap etc. or leaving outside and acid rain showing up on windows or paint. He is great.
Thanks Jonahs
TAZ
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by LasVegas:
Thanks TAZ. Help is what forums are all about. BTW, I emailed you a link to a great site I found for auto electrical parts up in Reno. Should have everything you need for your light bar project and any future elecrical projects. </div></BLOCKQUOTE>