Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

All of the anodized fittings and S/B line are standard Russell fittings. The fitting out of the compressor is a standard pipe thread 1/4" to 7/16" and the Russell elbow is 7/16" pipe thread to a 7/16" pressure fitting. The fitting underneath is a standard Russell 7/16" pressure fitting to a 7/16" pipe thread. I did use a rubber washer behind the coupler as well as teflon tape. After setting all this up, I found out Russell also has the matching 1/4" to 7/16" pipe thread fitting coming out of the compressor. I just haven't made it up to the speed shop to get one. I know it's probably a little overkill, but I ran a 210" dragster on the IHRA circuit for about 8 years and I learned to like S/B line.:D It also helps when this place is a half mile from my office and the owner was one of my sponsors when I raced. He still gives me great prices.: http://www.truckaddons.com/store.htm

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Awesome!
Thanks for the info!:beerchug:

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

My local Costco is carrying the Master flow air compressor. It is selling for $49.99. Check the automotive section at your local Costco.

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Now this is a blast from the past...:D

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

PEP BOYS runs about $54.00 tax included with coupon from their website.

Used mine last night in the parking lot of Outback. My daughter was running 22psi in her tires. OH WELL, YOU CAN LEAD THEM TO WATER...

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Wow.. Actually order one of these little puppies today from Amazon.com.. $70 delivered.. Was the cheapest price on the web I could find 'em.. Everywhere else was $69 - $99 + Shipping..

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

CANCEL YOUR ORDER

and pickup at Costco or Pep Boys ... remember the online coupon for Pep Boys

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

No Pepboys here.. This is Autozone turf.. No one else survives here...

By the time I paid for the Costco membership, I'd have broke the $70 mark so...

Besides, I got a ship confirmation from them last night.. Shipped USP ground from PA and it'll be in Memphis tomorrow morning..

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

When I move just south of Chattannoga we'll get togather...

RYD

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Chattannoga.. Dang man that's a 6 hour trip one way.. LOL...

There's some good wheelin' in them thar hills though...!!!!

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

6 HOURS ! DANG... I can drive the length of the state of Florida in 6 hours.

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Are you guys using it out of the bag or did you install it under the hood,Mines been installed for over a year no problems,it comes in very handy.:beerchug:

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Mine is under the hood and I love it! No problems so far.

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

I have seen the INSTALL in the rear compartment and under the hood.

I carry mine in the bag for now, BUT, I'm concerned with the underhood installation. There is a lot of heat there and I wonder how it might effect the seals and flexable parts...

COMMENTS !

RYD

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

Jacksonville - Miami = 350 miles

Memphis - Chatanooga = 340 miles

Just because FL is the dangly portion of the US, and just because for years now we men have been trying convince women that the dangly portions are bigger than they appear don't make FL any bigger...

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

My engine compartment has gotten muddy and wet many times
I even keep my airhose(in a clear dollar store zipped bag behind battery) and thats holding up to the cold then hot ect.If that yellow plastic hose holds up the compressor sure will.
I dont know how it will hold up to 10 or 20 years.
I figure the week spot for for the system is the air hose(the factory one)not the added line.
I figured the lifespan of the hose is 3 to 6 years the compressor should last a minimum of 10 years,



Thats longer then the head last on the H3's:giggling: :shhh:

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

DANG !!!!

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

I can't remember anymore.. To many long hours at work, playing on the computer between phone calls.. You wheel your 3..??

Prolly going to look at getting, or at least TRYING to get a group of folks together to go wheel at this place sometime early next fall maybe..
http://www.wheelininthecountry.com/

It's about the middle of TN more or less..

Most of what you see on their pics pages are built trail rigs, but from what I hear that's most of what you see on the Rubicon too and Hummers have taken that Ok...

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

I believe Pep Boy's price is $59.99 , but the coupon I found was only for $5 off anything in the store (when you spend $30).

Did you find another coupon? If yes, can you please post a link. Thanks.

Re: Master Flow MF-1050 Air Compressor Installation w/ pics
 

RYD - When are you moving to Chattanooga? I spend half my life now in the Smoky Mountains and will be a permanent resident of Gatlinburg as of June.:beerchug: