Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   General H2 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=6)
-   -   fading black bumpers... (http://www.elcovaforums.com/forums/showthread.php?t=29553)

vlxjim 09-18-2007 07:31 AM

Re: fading black bumpers...
 
I'll let the cat out of the bag use 303 Aerospace Protectant . Plastics look new and will last longer. I've used it for the last seven + years. This is the best stuff.:beerchug:



http://www.303products.com/tech/index.cfm?fuseaction=product.display&Product_ID=42 8&CFID=1022599&CFTOKEN=19326237

303 is THE LEADER in UV Screening Technology. 303 Aerospace Protectant really is like "SPF 40 Sunscreen ... For Your Stuff." Regular use gives 100% Prevention of UV caused slow-fade with regular use. No other "protectant" beautifies as intensely, protects as powerfully or lasts as long.

The World's Most Manufacturer-Recommended Product:
Because of its enduring cosmetic properties, the resistance of 303-treated surfaces to dust, soiling, and staining, its water repellency and unparalleled protective characteristics, manufacturers worldwide recommend 303 Aerospace Protectant.
303 Aerospace Protectant keeps UV-sensitive materials "like new" year after year.

Use on Rubber: Tires, neoprene, latex, door and trunk seals, weather-stripping, EPDM rubber roofs, CV boots, waders, wet suits. Vinyl: Convertible tops (and the clear vinyl windows), isinglass, marine seating, tonneau covers, car bras, covers, spa covers, pool covers. Inflatable boats: Hypalon, PVC and urethane blends. Gelcoat fiberglass: Boats, RV's, snowmobiles, jet ski's. Plastics, acrylics, polycarbonates: Lexan? and acrylic panels, windows, , windshields, covers. Carbon-fiber/resin composites: Fishing rods, "nude" bike frames. Finished leather: Upholstery, motorcycle leather, trim, tack, fine apparel. Pool & Patio: Plastic furniture (not fabric), pool inflatables, slides, covers. Sailcloth: Dacron? and monofilm.

tower 09-18-2007 07:47 AM

Re: fading black bumpers...
 
I hear it also makes a great personal lubricant. Not to mention high in protein, low in carb and fat.:dancingbanana:

HumminNBoatin' 09-18-2007 07:59 PM

Re: fading black bumpers...
 
I just used tire shine last weekend. So far it still looks great but greasy to the touch.

mdoyle 09-18-2007 10:39 PM

Re: fading black bumpers...
 
You know it sucks that we spend this kind of money for a quality vehicle and then get stuck with crappy plastic trim that requires heavy applications of goo to look decent.

I can think of a half dozen, old, cheap cars with no trim problems but nearly every H2 that sees the light of day has some worsening degree of trim fade.

SnakeH2 09-21-2007 01:45 PM

Re: fading black bumpers...
 
Quote:

Originally Posted by TXSUT
I used TS-1 for the first time this weekend, on every bit of exterior plastic. I think I learned a lesson, though, and that's not to let it dry for too long before wiping with the damp cloth. On the areas where I let it sit for a while before wiping, it seems to have dried hard and glazed over...I can see spots that seem to have a thicker layer of dried TS-1, a bit shinier than the other areas. It seems more prevalent on the less-textured pieces, like roof rails, body trim, etc.

Snake, any thoughts on this?

Pete


I hadn't expirenced that. I guess I was able to get to it before it dried. I usually did a section at a time.

TXSUT 09-21-2007 01:58 PM

Re: fading black bumpers...
 
Quote:

Originally Posted by SnakeH2
I hadn't expirenced that. I guess I was able to get to it before it dried. I usually did a section at a time.


Thanks, I'll be more diligent the next time I apply it.

-Pete

Gunzz 09-21-2007 09:11 PM

Re: fading black bumpers...
 
Just bought the TS-1 and applied it a few days ago. Very easy to put on and had no other trouble with it drying before wiping with damp cloth. The best thing is the brilliant dark black shine with no grease, so that dust doesn't get stuck to it. Just hope it does hold up. Packaging estimates over 90 days but I wash my truck twice a week so we'll see.

tower 09-21-2007 10:13 PM

Re: fading black bumpers...
 
New bottle design

Gunzz 09-27-2007 12:46 AM

Re: fading black bumpers...
 
Quote:

Originally Posted by Gunzz
Just bought the TS-1 and applied it a few days ago. Very easy to put on and had no other trouble with it drying before wiping with damp cloth. The best thing is the brilliant dark black shine with no grease, so that dust doesn't get stuck to it. Just hope it does hold up. Packaging estimates over 90 days but I wash my truck twice a week so we'll see.


Well the black looked great until I brought it through the car wash. Used a brushless wash with only quick soap and 2 rinses. When I came out I was shocked. It looks as thought the TS-1 washed away in the places where the soap was sprayed on, sort of like tiger stripes. Now I know that car wash detergents are extremely harsh, thats why I used the one soap and 2 rinse cycle, but for this to happen after one time shpuldn't be.

So I took some pictures of it and plan to write the company to see whats wrong. I mean even GM tech bulletins recommend this product. But for now I'm going back to PoorBoy's or maybe even try Mothers back to black as others have, and will hold off on recommending TS-1 to anyone else.

tower 09-27-2007 12:51 AM

Re: fading black bumpers...
 
3 washes and still looks great! :excited::excited::excited:Even on the spare. :):):) Next wash, I'll put it on all the tires to see how it holds up. :popcorn::popcorn::popcorn:

jmsspratlin 09-27-2007 04:02 AM

Re: fading black bumpers...
 
Quote:

Originally Posted by tower

I haven't used it for that long, but it still looks good after ~3 washes.



Thanks, I'll have to try that. I'm kinda lery of trying the TS-1 after reading the post above, however I am more wanting to go with this first.


All times are GMT +1. The time now is 03:03 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.