Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Local Events and Activities (http://www.elcovaforums.com/forums/forumdisplay.php?f=7)
-   -   Headed Back to MOAB!! (http://www.elcovaforums.com/forums/showthread.php?t=31456)

CO Hummer 03-12-2008 01:20 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Sewie
Just a little over a week until I'm hitting the road. :dancingbanana: :dancingbanana:


Too bad some of us CO folks are going to miss you. I hear you'll be leaving the day we arrive (late that night).

RuggedH2 03-12-2008 03:02 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
What did you get?


KM2's 38 14.50 17's

CO Hummer 03-12-2008 04:03 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
KM2's 38 14.50 17's


Bloody hell man! You better bring 3 or 4 sets of spare steering parts with tires that wide, combined with Moab slickrock. :eek: :eek:

Kenny busted his stuff with 13.50s.

Should look good though. :)

RuggedH2 03-12-2008 04:19 AM

Re: Headed Back to MOAB!!
 
I've already run around all over down there with 13.50's.

I did buy the pitman and idler support kit, and the idler pivot kit. I talked to Phil about swapping out the center link also, but the truck does spend more time on the road than off.......so I didn't do that part.

You're right though.....the steering with those wide tires was one of my primary concerns too. ;)

Edit*

I'm already used to wheeling a 3 and not breaking sh!t, so I should be OK. No smilies on edit so pretend there is a big grin here.

CO Hummer 03-12-2008 05:33 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
I've already run around all over down there with 13.50's.

I did buy the pitman and idler support kit, and the idler pivot kit. I talked to Phil about swapping out the center link also, but the truck does spend more time on the road than off.......so I didn't do that part.

You're right though.....the steering with those wide tires was one of my primary concerns too. ;)

Edit*

I'm already used to wheeling a 3 and not breaking sh!t, so I should be OK. No smilies on edit so pretend there is a big grin here.


You may not bust in Moab. But with that width I'd plan on replacing the steering components regularly. You definitely don't wanna try to force the wheel on things like the Golden Crack when you get wedged.

RuggedH2 03-12-2008 06:36 AM

Re: Headed Back to MOAB!!
 
I know what you mean, I've felt the steering "lock up" on a couple different obstacles with the 13.50's already.

I admit it is a gamble. I hope the Cognito parts make a difference in strengthening that system.

I'm planning to get new wheels also with the Staun internal beadlocks installed.......but for Moab I'm forcing these onto the 9" wide wheels I got from Tim. :eek:

I like to live dangerously......well that, or I didn't plan far enough ahead. :notallthere:

Call me foolish (you're probably right) but I'm optimistic that everything will work. Watch now nobody will want to wheel with me. Expecting "boom" any minute. :giggling:

Fortunately I'll be there wheeling for a few days before you guys get there........so if it's gonna go "boom", odds are it will happen before you guys gotta bail me out. :D

Sewie 03-12-2008 07:40 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
Too bad some of us CO folks are going to miss you. I hear you'll be leaving the day we arrive (late that night).


I'm not planning on heading home until the 29th. So I'll be around for a couple of the days you guys will be there.

RuggedH2 03-13-2008 03:59 AM

Re: Headed Back to MOAB!!
 
I got those KM2's on the truck!

I'm not worried about it anymore at all. They don't look any bigger than the Pro Comps that just came off.

The "shoulders" on the Pro Comps are much more squared than the KM2's. It makes them look bigger and wider.

I'm ready to put these tires to use on the trails. I could've bought an old Jeep for what they cost. :D

CO Hummer 03-14-2008 08:57 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Sewie
I'm not planning on heading home until the 29th. So I'll be around for a couple of the days you guys will be there.


Excellent!

Are you gonna be at the Gonzo with some of us?

CO Hummer 03-14-2008 09:04 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
Call me foolish (you're probably right) but I'm optimistic that everything will work. Watch now nobody will want to wheel with me. Expecting "boom" any minute. :giggling:


Looking forward to seeing that rig. It's gotta look great, I'm sure.

I would say OFF the escalator until your last day. That obstacle is going to give you the most buckle of anything in Moab.

It's not just your steering components that are at risk. The steering will wear away slowly. But the tied rods and joints on the axle can snap. Ask Ken! With 13.50s he buckled two HD Fabtech ties rods in no time.

Sewie 03-14-2008 08:52 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
Excellent!

Are you gonna be at the Gonzo with some of us?



I'm staying at Neo's, but save a spot for me in the parking lot. :beerchug:

RuggedH2 03-15-2008 08:55 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
Looking forward to seeing that rig. It's gotta look great, I'm sure.


A couple of you guys are driving rigs that I really want to see. It's gonna be interesting watching your new rig.

Adam in CO 03-16-2008 05:42 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
Looking forward to seeing that rig. It's gotta look great, I'm sure.

I would say OFF the escalator until your last day. That obstacle is going to give you the most buckle of anything in Moab.

It's not just your steering components that are at risk. The steering will wear away slowly. But the tied rods and joints on the axle can snap. Ask Ken! With 13.50s he buckled two HD Fabtech ties rods in no time.


...and blew out the hubs

RuggedH2 03-16-2008 06:38 PM

Re: Headed Back to MOAB!!
 
Damn.......what was he doing? :D

moabxj01 03-16-2008 11:47 PM

Re: Headed Back to MOAB!!
 
Is the agenda set up for the week yet? Or who do I contact to find out whats going on?

I am buying an H3 this week and figure I might as well break it in properly :)

RuggedH2 03-17-2008 03:17 AM

Re: Headed Back to MOAB!!
 
MoabXJ01,

You are welcome to come along.

Reservations in Moab might be kinda tricky.....but shouldn't be impossible. If you don't mind staying in a tent, a guy that lives down there will probably let you put one up in his yard (there will be others there too).

I live right down the road from you, PM me and I can get you any info you need.

I'm rolling down either Thursday or Friday depending what I can get done.

Do you still have the XJ?

moabxj01 03-17-2008 03:30 AM

Re: Headed Back to MOAB!!
 
Yeah I think we will just be camping out. I want to leave next thursday but my friend probably can't get off work till friday(28th) so I'm guessing we wont leave until then.

I sold the xj a few years ago but the name has stuck since all my email and other logins were based on it ;)

I am excited to get the hummer and see what it can do in moab. I'll send ya a PM.

Thanks,
Ryan

Adam in CO 03-18-2008 06:45 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
Damn.......what was he doing? :D


Escalator.

RuggedH2 03-18-2008 08:08 PM

Re: Headed Back to MOAB!!
 
Yeah that's what CO said too.

I watched a Dana 60 full width (and stretched) YJ, with 6 inches of lift struggle like a mother f*cker on that.

I don't know how my tie rods will do.....but I do think Hummers have an advantage on that over short wheel bases.

Adam in CO 03-19-2008 12:25 AM

Re: Headed Back to MOAB!!
 
So, now I'm thinking of coming the 26th, instead. As it draws nearer, I get more anxious to get the hell outta here.

CO Hummer 03-19-2008 05:48 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Adam in CO
So, now I'm thinking of coming the 26th, instead. As it draws nearer, I get more anxious to get the hell outta here.


WTH? I thought you were always planning to go on the 26th. :confused: I'm hoping to leave around 5-6pm.

Adam in CO 03-19-2008 02:39 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
WTH? I thought you were always planning to go on the 26th. :confused: I'm hoping to leave around 5-6pm.


No. Always had been on the 27th. Regardless, I am going much earlier in the day than 5-6pm. I dont want to get there in the dark.

RuggedH2 03-20-2008 05:28 PM

Re: Headed Back to MOAB!!
 
I'm leaving tomorrow morning, be in Moab for lunch (with 10,000 Jeepers).

See you guys there.

RuggedH2 03-20-2008 05:30 PM

Re: Headed Back to MOAB!!
 
I forgot to add that it snowed an inch at my house this morning......but the temp is 63 degrees in Moab right now.

Forecast looks like mid sixties all next week (for now, anyway).

timgco 03-26-2008 10:22 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Adam in CO
I dont want to get there in the dark.


haha, Adam and his lights...afraid to use them. :notallthere: :clapping:

KenP 03-26-2008 11:07 PM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
It's not just your steering components that are at risk. The steering will wear away slowly. But the tied rods and joints on the axle can snap. Ask Ken! With 13.50s he buckled two HD Fabtech ties rods in no time.

We had 15.5's and were always replacing junk in the front.

CVs, tie rods and center links when bent or broken, bring teh sucketh.

RuggedH2 03-27-2008 10:36 PM

Re: Headed Back to MOAB!!
 
I just got back.

Didn't break anything (did bend some steel, but nothing that matters - damn trailing arms, I hate everything that hangs down on this truck). We ran Moab Rim, Kane Creek, Strike Ravine and Steel Bender.

Complete kick in the ass.......The H2 rocked.

These BF Goodrich KM2's are the best truck tire I've ever owned. The flex is unreal and the traction is outstanding! Absolutely great tire!

Sewie 04-01-2008 01:28 AM

Re: Headed Back to MOAB!!
 
Got back last night.

Quote:

Originally Posted by RuggedH2
Didn't break anything


Wish I could say the same. :mad: :mad:

- Hub assembly
- Steering Rack
- CV axle (busted on I-70 on the way home) :rant:

Truck is still in SLC at the dealership. I have to drive back next weekend to get it. :crying:

Still had a great time when I wasn't dealing with breakage. Good to see everyone again although I wish I could have run some more trails.

RuggedH2 04-01-2008 02:37 AM

Re: Headed Back to MOAB!!
 
Sewie call me when you get in town. I'll buy ya dinner and some beers.

:beerchug:

ROX 04-01-2008 04:13 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
Sewie call me when you get in town. I'll buy ya dinner and some beers.

:beerchug:

We're here for the night! or 2 :)

ROX 04-01-2008 04:15 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Sewie

Truck is still in SLC at the dealership. I have to drive back next weekend to get it. :crying:

bummer dude. sorry to hear that. I'm hoping to get out Wed a.m. in between snow storms.

CO Hummer 04-01-2008 05:11 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by Sewie
Truck is still in SLC at the dealership. I have to drive back next weekend to get it.


Can you get it shipped? It would probably be the same as gas & airfare.

Sewie 04-01-2008 07:07 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by CO Hummer
Can you get it shipped? It would probably be the same as gas & airfare.


There wasn't a flight out until 10pm and no non-stops to ANY of the Bay Area airports. :lame: I wouldn't have arrived until this morning.

I ended up renting a car for the week. Cheaper than flying, unlimited miles, plus I have something to drive to work. And most of it will be reimbursed through warranty.

Sewie 04-01-2008 07:10 AM

Re: Headed Back to MOAB!!
 
Quote:

Originally Posted by RuggedH2
Sewie call me when you get in town. I'll buy ya dinner and some beers.



If I end up spending the night I'll definitely take you up on that. :beerchug:


All times are GMT +1. The time now is 08:53 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.