Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
The Bunny strikes again....:D |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
|
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
F5..I don't understand this....
04/25/2006 414203 # F2383 - RING GEAR AND PINION - REAR DIFFERENTIAL - REPLACE 19285 miles My rear diff is in PA being replaced right now??? At leasts that's what they are telling me.... Ok...so like I said in my thread original I'm still learning what these parts are....so sue me if I mistaken the word "bearing" for "pinion" or whatever. So...they replace my Ring and Pinion in the front differential....? is that right? |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
220. 221. Whatever it takes....
|
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
If the rear diff is being replaced right now, there will be no claim for the replacement, until the job is finished. At which time they will claim the same labor operation number F2383. If, and I say if because I'm not in the dealer, you had the lapping compound issue and didn't realize it until 19K miles, and the dealer only replaced the ring/pinion set, that could be why your rear diff failed again. If the first rear diff was a complete assembly replaced, the dealer would have claimed F3200 Rear Differential Assembly (Complete) - Replace. It almost sounds like this is the problem. Maybe with all those new radios you couldn't hear the rear axle whining.:D (Only kidding...) The only other thing would be if it wasn't the lapping compound problem, the first tech may not have set up the ring/pinion gear correctly, and they failed a few thousand miles later. To be completely honest to you and everyone else, we DO NOT have a problem with rear diffs; other than the lapping compound issue. The rear diff is strong enough so that if something breaks it is usually the axle shaft (weakest point in the link), versus the front diff. :( |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Your front diff hasn't been touched. You had a front axle seal replaced and that's about as close to the front diff as it got. |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Ut-Oh HI, your lies have finally caught up with you. I told you this was a bad idea!
|
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
ok..then what the fuk is the sh!t on the bottom of my work order??? I'll scan damn thing and post if you think I made this up as well
19308 *had bad ring and pinion gears* - Test drove had clicking noise, sounded like coming from front diff, remved cover inspected foun no sign of problem reinstalled cover check ed fluid levels in both front and rear diff and transfer case, called tan talked to XXXXXXX said to run rubber hoses from front diff and transer case vents test drive to see if could hear noise found noise coming from front diff (Case #8903956) R&R dfont diff found chips in ring and pinion gears, also found preload on pinion at .008" Replaced ring and pinion gears and bearings and side carrier bearing, set preload to .27 spec .015 to .030 rest back lash to .006 spec .003 to .010 perfered .005 to .007 reinstalled in vehicle test drove no noise heard from front diff - RFI casae C16615100376 Excessive rental due to parts being damanged on two orders XXXXXX aware of issue" |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
SNAP!!!
Scan it! |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
A scan will help, but remember ... we can tell if it's been photochopped. Could you possibly get any and all people who had something to do with your vehicle sign the document approving accuracy, and have it notarized and mailed via registered mail to each of us. Also, please post a list of all numbers where we can reach said people to clear this whole fiasco up.
|
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
will do in the morning once I get to work.... Is is possible that perhaps the dealer entered a wrong number or something?:confused: :confused: |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
1 Attachment(s)
Quote:
You typed all of that??? RAARRRR!!11!! You = pwn3d by enragement |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
I had PM'd all that to F5 and NoMo eariler to see if they could explain it....:rolleyes:
copy and paste.... |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Yes, the dealer could have pulled the incorrect number for the repair, correct labor op would be F2382 versus F2383. Easy to fat finger one digit. In addition, since all repair times for H3 at time of repair were straight (vehicle not time studied till a month ago by GM to set exact times), to the warranty people, it would pay whatever it took to repair (tech punches in/punches out). Only thing that would be affected would be warranty reports run to see what parts are failing at what rate. To be honest everyone, I can't believe anyone would have the correct names, the suggested diagnosis without this being for real. It appears from my end, that it was a front diff gear replacement, and it was a mistake in the system by the warranty person at the dealer. However, please explain how you damaged your front crossmember?:D |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
|
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Can you say Tellico :D Don't know for sure but as I recall she was having some noise coming from the front end and they thought it might be the front suspension. Ended up being something to do with loose bolts on the cross member or something like that but I could be wrong. |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
YES!!! |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Could it possibly be from when you backed in to the front of her H3???:rolleyes::D |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Thanks F5 AND NoMo...I appreciate your help. I've pointed this possible keying error out to the dealer...we'll see what they do about it..? How about that FRONT Differential??!!!!:rolleyes: Not sure about the front crossmember. There was squeeking when I would drive over a speed bump or something like that. The work order says something about bolts loose....I can PM the details to you later if you'd like. |
Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
Quote:
Personally, I don't see why there is a need to persecute the woman over semantics. Do you feel the need to be precise and 100% correct at all times and have no tolerance for others ignorance or lack of nomenclature? This is just lame.:rolleyes: |
All times are GMT +1. The time now is 10:59 AM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.