Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   General H2 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=6)
-   -   Oil change? (http://www.elcovaforums.com/forums/showthread.php?t=19151)

menuserve.com 08-04-2006 08:33 PM

Oil change?
 
do you get your oil changed at the dealer or just a jiffy lube? If you do go to a jiffy lube is there anything that you have to tell them?

also i notice the engine oil % meter on the computer... if someplace like jiffy lube does the oil change how does this get reset?

CO Hummer 08-04-2006 08:36 PM

Re: Oil change?
 
Quote:

Originally Posted by menuserve.com
do you get your oil changed at the dealer or just a jiffy lube? If you do go to a jiffy lube is there anything that you have to tell them?

also i notice the engine oil % meter on the computer... if someplace like jiffy lube does the oil change how does this get reset?


I take mine to Jiffy Lube. Once in a while don't screw the oil filter on right and it leaks. The guys at Jiffly lube DO reset the % meter.

DDWH 08-04-2006 08:38 PM

Re: Oil change?
 
I wouldn't let Jiffy Lube change the oil in my lawn mower!:eek: I never had nothing but issues with them, lose oil plugs, cross threaded oil plugs, not changing the oil filter, breaking the hood latch on my wifes Mercedes and the icing on the cake was the time they didn't tighten the oil filter and my rig unloaded its cargo on my garage floor.... I had to have it towed to my mechanic!:mad: :mad:

never again, I just have it done at the dealer for free or at my mechanics, depending on where I am.

KenP 08-04-2006 08:39 PM

Re: Oil change?
 
Dealer. The first two are free and it's still cheap after that. I can just pull right up to the service bay and right onto the rack.

DennisAJC 08-04-2006 08:41 PM

Re: Oil change?
 
I do it myself.






......And I also change the oil myself.

CO Hummer 08-04-2006 08:44 PM

Re: Oil change?
 
Quote:

Originally Posted by DDWH
I wouldn't let Jiffy Lube change the oil in my lawn mower!:eek:


Funny story........

Last time I took it to Jiffy Lube I heard this major pounding noise. I was the only one there, so I walked around into the garage to see what they were doing to my H2. There were three idiots using a hammer trying to get my winch off (so they could open the hood) . I couldn't believe it. They were trying to pound the hitch pin THROUGH the rig (top down). Unfortunately for those geniouses, the pin lifts UP and has a ridge on it that prevents it from going all the way through (down). Nicely enough, they had actually pounded it half way. :mad: I stopped them, and it took me five minutes to pound it back up to get it out.

KenP 08-04-2006 08:44 PM

Re: Oil change?
 
1 Attachment(s)
Quote:

Originally Posted by DennisAJC
I do it myself.

:D

DennisAJC 08-04-2006 09:33 PM

Re: Oil change?
 
Changing oil is simple. The only thing I'm worried about is greasing the nipples. I hunt them don but worried I missed a few.

Yellowxdude 08-04-2006 09:47 PM

Re: Oil change?
 
What do your dealers charge for oil change? Mine quoted me $69. Also told me to change every 3k instead of following the % life meter. What do you follow?

DennisAJC 08-04-2006 10:02 PM

Re: Oil change?
 
Quote:

Originally Posted by PhilD
I get in trouble with the wife if I try to hunt down and grease too many nipples ;)

I think this all of them;

Upper & lower ball joints on each knuckle (4)
Inner & outer tie rod ends each side (4)
Pitman arm (1)
Idler arm (1)
Idler arm bracket (1)

11 in total.


Sweet! Thanks Phil. Looks like I misse 4 nipples.

Agriv8r 08-04-2006 10:19 PM

Re: Oil change?
 
Quote:

Originally Posted by DDWH
I wouldn't let Jiffy Lube change the oil in my lawn mower!:eek: But they can work on my wifes Mercedes and my rig.:mad: :mad: .


:confused: ??:confused:

wilfred 08-04-2006 10:55 PM

Re: Oil change?
 
Quote:

Originally Posted by PhilD
I get in trouble with the wife if I try to hunt down and grease too many nipples ;)

I think this all of them;

Upper & lower ball joints on each knuckle (4)
Inner & outer tie rod ends each side (4)
Pitman arm (1)
Idler arm (1)
Idler arm bracket (1)

11 in total.


Once again, thanks to this forum and especially members like PhilD! I've been changing oil on my '03 since new and didn't know i had to grease any nipples:p i guess i better pick up some grease over the weekend, any specific kind/weight?

wilfred 08-05-2006 02:48 AM

Re: Oil change?
 
Thanks again!

Aubs 08-29-2006 05:19 AM

Re: Oil change?
 
Is there a posted procedure as to how to change the oil out? I bought oil today to do the change, and will probably have my friend's grandpa help me out with it. The only time I watched, the guy removed the skid plate. Is that needed? I also will probably change the air filter.

h2co-pilot 08-29-2006 12:02 PM

Re: Oil change?
 
Quote:

Originally Posted by Aubs
Is there a posted procedure as to how to change the oil out? I bought oil today to do the change, and will probably have my friend's grandpa help me out with it. The only time I watched, the guy removed the skid plate. Is that needed? I also will probably change the air filter.


http://www.elcovaforums.com/forums/showthread.php?t=889

CO Hummer 08-29-2006 04:13 PM

Re: Oil change?
 
Quote:

Originally Posted by Aubs
Is there a posted procedure as to how to change the oil out? I bought oil today to do the change, and will probably have my friend's grandpa help me out with it. The only time I watched, the guy removed the skid plate. Is that needed? I also will probably change the air filter.


You don't need to remove the skid plate. I just did mine this weekend and I have a much bigger skid plate that stock.

In fact, if your a bit flexible and have an 18" hose on your grease gun you can reach all 11 zerk valves to do the lube job WITHOUT removing the skid plate. However, you have to change that one impossible zerk to a right angle valve (which I did) and point it it straight up.

Aubs 08-29-2006 04:47 PM

Re: Oil change?
 
Yay! Thanks for the info. I did a search for "H2 oil change" and only returned this thread.

Other questions, is it 6 or 7 quarts of oil? I was told 7 by the dealer a while ago. So I bought 2 cases of the Mobil 1 synthetic 5W-30 at Costco. Maybe I only needed one.

What is the tool needed to remove the oil filter? Is it something commonly found in a garage?

I guess the next two things due are the T-case fluid and the Transmission fluid. I'm close to 60K.

Oh my final question:

On the driver's side engine exhuast manifold, what is the part# for the bolts that hold the manifold onto the engine? I have been missing the rear most bolt for some time now. Do I need to replace the gasket as well? I'm assuming some type of loc-tite is need on the bolts too. Not sure if I'd use red or blue, or what type of torque the bolts need either.

BlueHUMMERH2 09-04-2006 03:38 AM

Re: Oil change?
 
Ok, I did the oil change. It was easy. Having someone there who knew what he was doing was very nice. I felt a little less uncomfortable.

Underneath


Stoopid dog that was pesty


Kinda messy


All times are GMT +1. The time now is 07:52 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.