Anybody have reccomendations for an air horn setup? Just got off the phone with Lynch Hummer and they say STAY AWAY from the REALWHEELS horn!! He said that literally EVER SINGLE horn they sold has came back with problems, usually in the valves. He went on to say that in order to get it fixed you have to send it in and that most are without the horn more frequently than they have it installed. He strongly strongly urged me to stay away from the realwheels horn!!

Any suggestions or aftermarket air horns that anyone has experience with??

Thanks

Anybody have reccomendations for an air horn setup? Just got off the phone with Lynch Hummer and they say STAY AWAY from the REALWHEELS horn!! He said that literally EVER SINGLE horn they sold has came back with problems, usually in the valves. He went on to say that in order to get it fixed you have to send it in and that most are without the horn more frequently than they have it installed. He strongly strongly urged me to stay away from the realwheels horn!!

Any suggestions or aftermarket air horns that anyone has experience with??

Thanks

A few ideas here: http://elcova.com/groupee/forums/a/t...7321083621/p/4

Since you're also in the market for a new cabin air vent, maybe you could pipe the air through the horns?

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Anybody have reccomendations for an air horn setup? Just got off the phone with Lynch Hummer and they say STAY AWAY from the REALWHEELS horn!! He said that literally EVER SINGLE horn they sold has came back with problems, usually in the valves. He went on to say that in order to get it fixed you have to send it in and that most are without the horn more frequently than they have it installed. He strongly strongly urged me to stay away from the realwheels horn!!

Any suggestions or aftermarket air horns that anyone has experience with??

Thanks </div></BLOCKQUOTE>
I have them installed on my H2. Here is what I have been through:

• First time, Air Horns just went bad during the winter. Sent them in and was without them for about a month, cost me 20 bucks to ship them.
• Got them Back and the new set did not work. They guy never did figure out was wrong with the set I sent in.
• Bought a new Air Horn through Jason on this website, and that was DOA. He took them back minus a restocking fee.
• Bought a third set (I did not learn my lesson) and that seems to work so far without problems. I should point out it’s only been on the H2 for about 3 months.

Another concern if you have an alarm is if the compressor decides to “pump up” in the middle of the night, guess what? You alarm will be going off. Now you have pissed off neighbors…

They are inconsistent to say the least. Well inconsistent in regard to working well.

You may want to look at the post which rodster listed above. Dan has the train horns, which he seems to like. I plan on checking them out this weekend at Paragon. Even those Train Horns were not “turn key” Dan had to do a lot to get them to work well, but as long as they work well now, is all that counts.

Cool, so is DAN the only guy here that custom fabricated his horn setup?? Looks like he has the LiteGlow air horns....the other post was referring to Hadley horns any input on these? I was looking for a setup that could mount fully under the hood, like the realwheels one.

JMV1210: That is EXACTLY why I am steering clear of the RealWheels kit!! I am very pleased to see that Lynch has their customer's interest ahead of the profit, because Scott at Lynch parts was VERY CLEAR to avoid this kit!! I am sorry to hear that you had to go through all the trouble that you have with it!! But at least, when it is working, is it a fun toy??

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> Since you're also in the market for a new cabin air vent, maybe you could pipe the air through the horns? </div></BLOCKQUOTE>

Actually that's not a bad idea........but the air horn is going on the H2, not the H3.

How does this setup look??

http://cgi.ebay.com/ebaymotors/Train-Air-Horns-100-Duty-Viair-Compressor-150dB-Loud_W0QQcmdZViewItemQQcategoryZ33704QQitemZ799159 8229QQrdZ1

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">JMV1210: That is EXACTLY why I am steering clear of the RealWheels kit!! I am very pleased to see that Lynch has their customer's interest ahead of the profit, because Scott at Lynch parts was VERY CLEAR to avoid this kit!! I am sorry to hear that you had to go through all the trouble that you have with it!! But at least, when it is working, is it a fun toy?? </div></BLOCKQUOTE>

I am not sure if you realize it but the RealWheels kit is made by hadely. Real Wheels markets the kit for Hadely. Ya, when it works its cool......

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">How does this setup look??

http://cgi.ebay.com/ebaymotors/Train-Air-Horns-100-Duty...temZ7991598229QQrdZ1 </div></BLOCKQUOTE>

The only thing is will that fit under the hood? You may have to mount the compressor (like Dan did) in another location and run lines from the compressor under the hood to the Air Horns.

I've been through 2 of the Real Wheels horns. The first one blew the valve off while I was refilling a friends tire and the second one where it screws into the air tank somehow sprung a leak. I just took it off and threw it in the garage till I get bored enough to try to fix it.

Joe, we get to hear Dan's in a few days! I'm going to make sure it goes on tape!

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rodster:

Since you're also in the market for a new cabin air vent, maybe you could pipe the air through the horns? </div></BLOCKQUOTE>

Why not do everything from the grill- like a Hummer Harmonica!!

Poop, I forgot about missing Dan's Horn! I'm too busy thinking about missing his fantastic buns. Video tape it for me please.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Why not do everything from the grill- like a Hummer Harmonica!!

Poop, I forgot about missing Dan's Horn! I'm too busy thinking about missing his fantastic buns. Video tape it for me please. </div></BLOCKQUOTE>

Dont you worry, we will get you some good footage!

I had a day off in Alanta about a month ago. And went to Lennox Mall, and I walked out of the mall and there was a really nice looking orange H2 and one of the things I noticed on it was the air horns.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h2co-pilot:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rodster:

Since you're also in the market for a new cabin air vent, maybe you could pipe the air through the horns? </div></BLOCKQUOTE>

Why not do everything from the grill- like a Hummer Harmonica!!

Poop, I forgot about missing Dan's Horn! I'm too busy thinking about missing his fantastic buns. Video tape it for me please. </div></BLOCKQUOTE>Whatever... I'm not videotaping his buns for you.

Humm This, your problem has been discussed before. Taking it back is the solution.

Don't worry CP, you'll get some buns pics even if I have to take them myself!

My horns are working pretty good. The bell (back round part with the diaphram in it) loosened on two of them and stopped sounding. I sent them back to the place I bought them, who then forwarded them to Grover. Apparently Grover is the manufacturer. I got them back in the mail with an instruction sheet on how to "voice" them. Basically you take them off the manifold, put air through each one and mess with the bell until it sounds clean. I thoroughly enjoyed irritating the neighbors tuning them!

Theyre back in the truck and they sound good. I wrapped the joint where the bell meets the trumpet with aluminum tape to keep them from loosening up again.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dan:
Don't worry CP, you'll get some buns pics even if I have to take them myself!

</div></BLOCKQUOTE>

A lil video might be nice too.

This thread is soooo horny!!

CP,

The buns in Ken's avatar work just fine for me. Do we need any more bun pics?

I was looking at purchasing the "ultimate hummer horn", it is an electronic air horn and 122db, here is the link:
http://www.lacosamojada.com/
has anyone had any experience with this horn? Good, bad or ugly???

Haven't heard anything, but it doesn't have an air supply. So the air is somehow generated by what? A small impeller?

Turn the volumn up and hit this:
http://www.liteglow.com/sounds/MOV01819.mp3
Nice, huh?

Here's a link:
http://www.liteglow.com/products/product_info.php?cPath...52e7b136226b2b842c29

There's probably no air involved. Some electrical setup similar to a buzzer must move the diaphram.

122db? That's it??

Ken, I haven't heard that sound clip in a while. I think I need to tweak mine a little more. Besides, the neighbors need more noise.

Here are links to Whelen for an electronic airhorn with or without PA. The speaker is easy to mount behind the grill of in the engine compartment. This is the airhorn on firetrucks.
http://automotive.whelen.com/static/p271.htm
http://automotive.whelen.com/static/p116.htm

If you redirecdt the air back into those tahoe chasis - they float apparently

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dick Renaud:
Here are links to Whelen for an electronic airhorn with or without PA. The speaker is easy to mount behind the grill of in the engine compartment. This is the airhorn on firetrucks.
http://automotive.whelen.com/static/p271.htm
http://automotive.whelen.com/static/p116.htm </div></BLOCKQUOTE>Hey, where have you been? I got some **** I could be asking you, I think.

I have been of having a kidney transplant and almost set to travel again. Will be picking up a motorhome in OR in November and towing my new 06 H2 to Alaska to brake both in.

You are going to break in a kidney and an H2 on the same trip - I wish you the best of luck.

I was refering to the motorhome and H2. Kidney is working fine. I am told it came from a young guy from S. Calif. Now I have an urge to go surfing.

Damn glad to see you back and healthy. You're doing my little mini dream. What size coach are you getting, if you don't mind me asking. You need to look up Drtyfn when you get your coach because you are probably picking it up right near him.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dick Renaud:
I was refering to the motorhome and H2. Kidney is working fine. I am told it came from a young guy from S. Calif. Now I have an urge to go surfing. </div></BLOCKQUOTE>

This is why I carry a donor card - and why everyone else should as well - Good luck to you - enjoy the trip and remember that the surfing urge is well earned.

It is a 42 Monoco Signiture Quad Slide. I pick it up in Eugene OR

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dick Renaud:
It is a 42 Monoco Signiture Quad Slide. I pick it up in Eugene OR </div></BLOCKQUOTE>Damn, you are starting to piss me off. That's a nice setup and it won't have any problems with the 2 as a toad. That's really where I want to be and having quad slides is the deal. Except I need a plan where they have the small bunks on one side for 2 kids.

Cool deal, I'm jealous.

It has two couches that pull out into beds. Would hold 4 kids. Monaco will also do custom work and make about any plan you want for a price.

If you have air suspension package on H2, which has a built in air compressor, is there a way to use this compressor for an air/train horn?? I have seen some horns sold without compressors.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by H2Singh:
If you have air suspension package on H2, which has a built in air compressor, is there a way to use this compressor for an air/train horn?? I have seen some horns sold without compressors. </div></BLOCKQUOTE>

No