anyone have a picture of the light switches that go in the lower consol. i order two sets of them, but they are on back order for 1-2 weeks. just curious how they look.

anyone have a picture of the light switches that go in the lower consol. i order two sets of them, but they are on back order for 1-2 weeks. just curious how they look.

look around on this forum, there was a post that had a couple of good pics.

I got this one at radio shack for my airhorn.Im curious what the factory ones look like.

TTT

SEARCHED BUT CAME UP EMPTY HANDED.

ANYONE HAVE A PIC OF THE OEM SWITCHES.

THANKS

Found a pic under- Swith PN for Roof Marker Lights.

those are not OEM switches are they? that is not a very clean fit for the dash imo. however for an aftermarket set up it looks fine as well as functional.

Not sure if they are OEM, in post it was assumed.

I FOUND A PICTURE. THE OEM'S ARE PUSH BUTTON CIRCLES WITH A PIC OF A LIGHT AND AN ARROW THAT I ASSUME LIGHT UP WHEN ON. THEY LOOK REALLY CLEAN AND I AM GLAD I ORDERED THEM TO REPLACE THE PIAA SWITCHES. THEY ARE KIND AN EYESORE COMPARED TO THE REST OF THE CONSOLE.

List the pic if you get a chance.

Where is pic??

Hey crop000s,

Those switches that you are referring to are not OEM. I bought at Auto Zone, Auto parts store, they cost me around 3 bucks each. But they look pretty good looking down from driver seat.

My mistake, sure would like to see some OEM's now.

The one on the Left is a OEM switch. Complements of Crisco

This is Crisco's light bar installation. it will show a pic of the OEM Button

How come the left one is not staight.Needs slight adjustment it would drive me crazy.Otherwise they look great.Still like to see OEM switch.Does anyone know if there is a OEM momentary switch?.

Hey Fourfourto,

I know. just a little details. It's fixed know. These are nice looking switches. they have a blue light that comes on when the switch is on. By the way they come in different colors, blue, green, red, or even no light at all.

When I called my dealer they asked for $45 per each and 1 week to get them. So I decided to get these are cheaper and better looking. The Oem switches has two different switches, one pointing the arrow up and the other one down. Idon't know if they have a momentary switch or not. try asking the "partsguy" he is pretty knowledgeable.

Re: light switches again
 

FourFourto do you have a part number or did you just pick up at the local RS?

Re: light switches again
 

No part #'s
Its in those draw type bins.There in all radio shacks
Mine is momentary they have on/off type also.
A big selection and there cheap:D

Re: light switches again
 

Here is the one that comes with the Grill/Off Road light assembly. It has two sets of numbers on it. 38963885 and D5338 I am not sure they are useful. I would also like to buy a second one.

For a picture of the switch and the scanned installation instructions, see this thread.

http://www.elcovaforums.com/forums/s...d=1#post288191

Re: light switches again
 

Thx 442...
Hey do you remember the dimension of the hole. Looks like 1/2 or 9/16 from the front?

Re: light switches again
 

I think it was 1/2 inch.
For my button I removed the plug.
Someone else used a smaller one and drilled a hole in the plug than snaped it in(that way you can snap the plug out for dash removal)
I put a RC car conector in the line for easy removal.(at radio shack also)

I dont think they have ones that light up,I seen some at auto zone that light up and will fit.or go OEM

Re: light switches again
 

OK I got my factory switch and harness in the mail today. However the three wires coming out the back of the harness are not labeled as to what they are. Does anyone know which wire is the +, -, and 12 volt source? All three wires are gray. I'm trying to splice this in to replace the PIAA switch.

Re: light switches again
 

My best bet is to test or try them both, I think that's what I did. Make sure to do it before you put back the dash cover. :dancingbanana: