Does any have the part numbers for the carbon-look dash pieces from the '06 Limited? Also, what about the part numbers for the fender flares also... Saw one this past weekend and the dsah looked pretty nice and the flares appeared to be bigger than a standard flare.

Thanks in advance,

Dan

Does any have the part numbers for the carbon-look dash pieces from the '06 Limited? Also, what about the part numbers for the fender flares also... Saw one this past weekend and the dsah looked pretty nice and the flares appeared to be bigger than a standard flare.

Thanks in advance,

Dan

"Cyber Carbon"
Center Dash Bezel 15294219
Right Bezel 15294221
Left Bezel 15294220
Center Console Rear 88986337 (Not Confirmed To Be Cyber Carbon Yet)
Center Console Piece 15294224 (Not Available Yet)

Can these be ordered by anyone? Someone posted earlier that you needed a Limited Edition VIN.

Just saw the Limited at the dealership tonight. I like it.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Humdingah:
Does any have the part numbers for the carbon-look dash pieces from the '06 Limited? Also, what about the part numbers for the fender flares also... Saw one this past weekend and the dsah looked pretty nice and the flares appeared to be bigger than a standard flare.

Thanks in advance,

Dan </div></BLOCKQUOTE>

Hey Dan,

I think these are what you are looking for:

http://cgi.ebay.com/ebaymotors/HUMMER-H2-Dash-Trim-OEM-...QQrdZ1QQcmdZViewItem

Bob

HummBob,

Good snag...I sent him am e-mail to see if they were the OEM pieces out of an '06 or if they were done by someone like Phoenix Imaging.

Dan

He replied back and claims that they are the pieces out of an '06 Limited but in the pictures I noticed that the far left piece (with the single vent and the headlight controls) doesn't have the hole for the 'Hot Shot' switch that I thought was standard on all of the Limiteds. We'll see what he says to that one...

Let me know what he says

hes usin trick wording like oem carbon"print" it could mean oem parts with a carbon print? or he could have the real pieces? im the one that posted you need a LE vin# to order thats what my dealer did about a month ago and i still dont have them but they were around 400 bucks and i didnt order the part for the back.

I've got the complete set I had pulled out of my 06 LE when I bought the truck. $ 800.00 + shipping. Pics available.

Post them pics Mseeb. I may be interested.

I'm almost positive the one on ebay is NOT one from a LE. The LE is MUCH darker and IMO looks right. I have a thread regarding this topic that includes actual pics from a LE that I took myself.

http://elcova.com/groupee/forums/a/t...1/m/1021090251

It's not! Hoko Is right this stuff is not around!can"t be bought(even if it's a warranty problem!I would guess it will cost(it is a guess)around 35 hundred!
I was told the light bar is vin# only to the LE but I have figured out the GM trick.They install the wiring harness at the factory and ship the bar seprate . Then they extracted the harness number out of the GM catalog.
It is the same harness as the Off road lamps that are round.It's a damn game!

LE Carbon Fiber 1

Pic 2 (Sorry For The Bad Picture Quality)

I assume the extra square hole on the right side of pic #2 is where the Hot Shot button goes.

Yes. It's for the hot shot system.

Look at this one http://www.predatormotorsports.com/i...ROD&ProdID=163 $450 I am putting in my H2 I will call to make sure its real not a print. The top of dash looks to be plastic still.

I had a kit similar to that in my 03 LUX. It's the stick on type kit. Once it's on, it's there to stay. Really can't be removed without damaging things.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by cow boy:
Look at this one http://www.predatormotorsports.com/i...ROD&ProdID=163 $450 I am putting in my H2 I will call to make sure its real not a print. The top of dash looks to be plastic still. </div></BLOCKQUOTE>

IMO, if your going to spend $450 for stick on, I feel it's worth spending an extra $400 or so for the real direct bolt on replacement parts. I'm getting a set including the rear console in Piano Black(glossy) from:

http://autodynamicswest.com/

I'm dealing with Greg. He's AWESOME. $890 plus s/h for the complete 6 pieces(includes speedometer bezel).

Contact him if you are interested. They have like a dozen different finishes.