steering stabilizer
 

I've decided to upgrade my steering stabilizer, but in removing the old one, the bolt on the passenger side (non moving side) I cannot remove, I have the nut off, but can't get the bolt out, is this bolt threaded into part of the steering, or does it pound out? I tried a wrench on the square (or whatever shape it is) but could not get it to budge, I didn't want to put too much torque on it. Anybody know? Thanks

Re: steering stabilizer
 

Go to local Auto Zone and rent a suspension fork and it will pop right off. I tried everything and couldn't get it off until I rented the fork.

Re: steering stabilizer
 

I haven't looked at the H2 but if it is anything like any other car be careful not to tear the rubber boot when using the fork!

Re: steering stabilizer
 

Those suspension forks are sometimes called "pickle forks" depending on who you're dealing with.

If the guy behind the counter is wearing a trucker hat and he looks like he just finished up rebuilding a 383 on his lunch hour, ask for a pickle fork......

Re: steering stabilizer
 

Thanks for the replys.

The in-laws have a set in their heavy equipment shop.
Will give that a try. I just wasn't sure if the bolt was threaded through every thing.

Re: steering stabilizer
 

same here dude....:D

Re: steering stabilizer
 

I'm going to alert campus security.:jump: