Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   need stock ride height (http://www.elcovaforums.com/forums/showthread.php?t=29066)

tomp 08-14-2007 05:57 PM

need stock ride height
 
please let me know stock front ride height from center of front wheel to bottom lip of fender flare

tomp 08-14-2007 09:47 PM

Re: need stock ride height
 
Anyone?

Vettster 08-14-2007 10:34 PM

Re: need stock ride height
 
25 1/2" on my 06 SUT.:excited:

tomp 08-15-2007 12:31 AM

Re: need stock ride height
 
Thanks Vett!

H2 007 09-14-2007 11:50 PM

Re: need stock ride height
 
Has anyone ever measured what would be close to level on the front?

From the ground up to the bottom of the fender flare on mine (stock) is 42 1/2".

I think on my last one (a 2005) it was 43", which made it a little more level. I recall having an alignment done after wards, but figured I see if anyone else has raised the front some to level it out a bit.

I do recall the ride was a little firmer, which I actually preferred as with stock it seems like it wants to 'lean' some while going around corners.

Thanks!

IRA51 09-15-2007 12:56 AM

Re: need stock ride height
 
you would be better off measureing from the frame to the ground on a level cement slab. body or fender lip is very hit and miss,too many variations.


All times are GMT +1. The time now is 12:37 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.