Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=26)
-   -   Shorty Antenna Replacement (http://www.elcovaforums.com/forums/showthread.php?t=4267)

primal-hunter 08-26-2005 06:47 PM

Has anyone found a shorty replacement antenna for the H3? The current one is too long and hits the roof of some garages.

I have tried the auto stores with no luck. The screw end is a 7 mm.

Any advice would be appreciated. Thanks

primal-hunter 08-26-2005 06:47 PM

Has anyone found a shorty replacement antenna for the H3? The current one is too long and hits the roof of some garages.

I have tried the auto stores with no luck. The screw end is a 7 mm.

Any advice would be appreciated. Thanks

Vegas-H3 08-27-2005 12:29 PM

I think it is the same as the H2, but not sure. In any case, I know someone who has one on their H3. I will find out the brand along with pics if possible. (IMO, it does look a lot better than stock).

mightypuck 08-30-2005 01:15 AM

Try this website: http://www.antennax.com/ the 15" OEM whip replacement mast. They are sending me one to try on the H3. I will post pics once installed.

tony d 08-30-2005 02:05 AM

http://www.gstylehummer.com has them

mightypuck 09-09-2005 12:45 AM

1 Attachment(s)
Here's a shot of my H3 with the 15" OEM whip replacement mast from AtennaX.

timgco 09-10-2005 01:23 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by mightypuck:
Here's a shot of my H3 with the 15" OEM whip replacement mast from AtennaX. </div></BLOCKQUOTE>

How's the reception? Will that rubber cap come off if you hit a branch or anthing or is it secure? What part number?

mightypuck 09-11-2005 01:53 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">How's the reception? Will that rubber cap come off if you hit a branch or anthing or is it secure? What part number? </div></BLOCKQUOTE>

The reception is good. The rubber cap is secure. The SKU # is AX-16 (15" OEM Replacement Mast). $14.99 on http://www.antennax.com

VTSTOMPER 09-11-2005 02:05 PM

I had that same shorty on my GMC...it worked well (was able to get it at K-Mart). With my H2 I cut about 6 inches off with a hack saw. I then put the little ball back on. Works like a champ!

timgco 09-12-2005 01:41 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
I had that same shorty on my GMC...it worked well (was able to get it at K-Mart). With my H2 I cut about 6 inches off with a hack saw. I then put the little ball back on. Works like a champ! </div></BLOCKQUOTE>

Did the same on mine! LMAO! But I used an old pair of wire cutters.

VTSTOMPER 09-12-2005 03:44 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by timgco:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
I had that same shorty on my GMC...it worked well (was able to get it at K-Mart). With my H2 I cut about 6 inches off with a hack saw. I then put the little ball back on. Works like a champ! </div></BLOCKQUOTE>

Did the same on mine! LMAO! But I used an old pair of wire cutters. </div></BLOCKQUOTE>

Man you have some good wire cutters...mine had a big dent in them after I tried that. They never let me down til that moment. I then had to heat the end of the antanna up with a blow torch, and hit it with a hammer to make the ball fit back on! Worked like a champ! Then I painted it black again!

WPBGUY 09-12-2005 09:50 PM

Check eBay they are there, lts of them, they run about $15 and are 15" tall

TorontoJeff 09-22-2005 12:49 PM

I just installed the antennax shorty antenna. Looks fantastic, dont hit on garage door anymore and reception is at least equivalent and maybe better than before. I recommend.

DarthKarl 09-22-2005 03:10 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TorontoJeff:
I just installed the antennax shorty antenna. Looks fantastic, dont hit on garage door anymore and reception is at least equivalent and maybe better than before. I recommend. </div></BLOCKQUOTE>

I've done the same. It works great and gives the H3 a more polished look.

primal-hunter 09-29-2005 09:52 PM

I put the antennax shorty antenna on and i did a test with distant stations on both FM and AM by changing antennas.

My estimation is the short antenna is slightly less effective than the larger one.

MyxH3 09-30-2005 01:59 PM

Thanks for the posts I just ordered one myself

jp's-h3 10-05-2005 12:24 AM

I've had my shorty antenna for a few weeks. A great addition, awesome reception, looks great! Two thumbs up!

SHYANNE 05-12-2007 10:19 PM

Re: Shorty Antenna Replacement
 
do you still have to take it off at the cars wash or will it not get hung up ? mine did the long one today.i would thing its short enogh.

Groundpounder 05-14-2007 03:06 AM

Re: Shorty Antenna Replacement
 
I got a Bullit one off of eBay, however, the end screws were to big or not the right thread. I installed the old one back on after cutting it short with a hack saw. The car wash kept taking it off and they had a hard time putting it back on due to the threads being messed up. I ended up cutting it to about 3" long, spary-painted it chrome and recscrewed it back on as far as it woudl go. The reception is still good, AM and FM. I am mostly into XM now, so I am not worried about the total reception. When I have tried AM/FM they are still easy to hear.:D


All times are GMT +1. The time now is 11:15 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.