![]() |
Hey all I had the drivers rattle and I located it.
The tweeter in the drivers a pillar is mounted in a 3 clip retainer with ****ty tolerances. I pulled the a pillar plug removed the phillips head screw and took it off the tweeted has an 1/8" of an inch play in it. Enough to rattle at certain rpm's drove me nuts. I used some electrical tape and went around the tweeter housing and then snapped it back in rattle gone. UNO |
I AM GAY!
|
Thanks for the info. I'll have to check into that since I have a rattle coming from that area that is driving me crazy!
|
All times are GMT +1. The time now is 02:48 AM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.