View Single Post
  #12  
Old 04-07-2005, 09:02 PM
NoMoGMPG's Avatar
NoMoGMPG NoMoGMPG is offline
Hummer Expert
 
Join Date: Mar 2005
Location: Colorado
Posts: 757
NoMoGMPG is an unknown quantity at this point
Default

Check your S/C certification for manufacturer compliance. In order for the SEMA act to apply, the component has to pass the manufacturer's maximum specification. If it doesn't say approved for use by GM and will not void your warranty, it most certainly will. This has to do with powertrain components which increase the hp/torque. Don't blame GM for covering its own ass. Warranty costs are high as it is and ALL manufacturers are cracking down on modifications. Most people don't think about the whole picture when they add power, that the u-joints might snap, the trans might burn up, that the axles are too small. If you're going to blame someone, blame yourself for short-sightedness.
__________________
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
Reply With Quote