View Single Post
  #4  
Old 06-25-2005, 04:32 PM
ARH1956 ARH1956 is offline
 
Join Date: May 2005
Location: NE AL
Posts: 116
ARH1956 is off the scale
Default

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Brad:
I installed the K&N system as well.

I am getting a bad vibration as well at full throttle. I am finally glad to know where it is coming from.

Intimidator were you able to do anything to stop the vibration?

I absolutely hate the sound.

I also duelled mine out and it seems pretty loud and gritty. If anyone else has duelled out please tell me what size in dia. tail pipes did you use? I think they may have used to small of pipe on mine. </div></BLOCKQUOTE>One simple check with the K&N FIPK. The end of the kit tube that connects to the Throttle Body is VERY close to the fan. Loosen the 2 clamps on the hose connector here & gently push, or pry the tube against the housing then re-tigthten the clamps while holding pressure on the tube. This will give you just enough clearance to eliminate the fan from contacting the tube at high RPM. Good luck.
Reply With Quote