Tim
It has not been determied for sure that it will work. BLOWNZ06, Myself, and a couple of other guys are trying to figure it out.
I first thought it would take the Vette cluster hooked to projector to translate the feed for the projector.
What I'm justing scratching the surface on is after talking to a few Chevy Vette techs there is the possiblity that the HUD controls on the left of Vette cluster is a microprocessor that decodes feed for projector. so right now I'm running down that lead to see if it correct. There seems to be an agreement between Hummer tech and Vette tech that the previuosly mentioned HUD controller translating deal may be the only way to do it.
BLOWNZ06 has located a full cluster and projector with the HUD controls. Before We start tearing into that I'm trying to confirm that we do not need the cluster. If We do not need cluster We will have to get with Hummer tech after We find out where the feed to processor has to come from and it is possible that it has to come from several areas at once. Waiting on email replies from 2 guys. I plan on having it on if it can be done.
We will keep updates posted as We progress but, right now nothing to really report.
Anyone who would like talk to a Vette tech and find out where the feeds come from for the Vette then We may be bale to find those feeds in H2 but, could just come from a different VCM/ECM/PCM source etc.
TAZ
__________________
05 H2 SUV cus. paint, Magnuson SC 6/12lb boost, cowl hood scoop, 12" dash touchscreen, GM elec. fans, HPTuners.com tuning soft., Dynatech headers dual catback exhaust Jet Hot chrome front to back Flowmaster Super 40's, Diamo 8 Karat rims & 325X60-20" Toyo, 4 OEM Captain seats Katzkins leather, rear console computer inside running all AV/NAV etc., Infinity component system 3 amps Tsunami Caps, rear flip down 12" monitor, headrest monitors, overhead console boost, fuel pressure, & A/F ratio gauges
|