You can use the heavier guage orange 12v constant off the radio. For the switched, I would recommend the large guage white wire on the inside of the of the drivers fuse panel. This wire carries plenty of current, and usually has little if any noise. However, this accessory wire is not on the RAP circuit, and, I have not had the chance to verify a good location for that yet. You can gain access to the reverse lights either at the bcm (somewhat difficult, light bgreen wire in a black connector). Or you could just pull off one of the rear lenses and grab the wire at the light. You can get 12v from your trailer hitch wiring (make sure the fuse is in the fuse box for that as they sometimes leave it out and just put in a red plastic jumper in that position. Good luck!
__________________
\'05 Slate Blue Sut w/ Magnusun, JBA headers, custom exhaust, 22\" MC2 RT5 wheels, Pioneer AVIC Z1 nav, Passport SRX, Vizualogic A1000 dual, bi xenons, fog xenons, dual optimas, and just gettin\' started!
|