Yep I did just that, I took one long piece of masking tape and went across the grille. But 1st I made sure I parked on level ground (garage), then I used my sears craftsman laser lever. I projected the line across my grille and then masked the tape across the grille. This was my reference point for the bottom end of the letters. Then I measured the distance between each letter and the vertical slots in the grille. Once I applied the expoxy(clear) on the back of the letters I then used the masking tape to hold the letters in place for 24 hrs.
Its simple, Just apply a little common sense when doing this and take your time. After all, its a one shot deal and its the front that gets all the attention so do a good job!!!! Good Luck!
__________________
Victory Red, Auto,Lux, Cashm w/ eb interior, tow pkg, BFG all terr 285/75/16 incl. spare, black side step bars, SMA chrome hood handles, Kenwood DVD, K&N Air Intake, McCulloch 8000K H.I.D. headlights, Custom made 100% sheepskin seat covers, Dual DVD headrests,SMA dual exhaust,Roof marker lights.
|