View Single Post
  #2  
Old 03-19-2007, 02:03 PM
pdsq99f4 pdsq99f4 is offline
Hummer Veteran
 
Join Date: Nov 2006
Posts: 172
pdsq99f4 is on a distinguished road
Default Re: Removing pillar trim.

Remove the little cover above the rear seatbelt anchor and remove the screw inside there. Remove the seatbelt bolt with a T-50 torx bit. Pull the swing gate weatherstrip down a bit and pull out on the panel. It should jut pull out, the upper and lower panels are seperate, they just clip together.
Reply With Quote