Quote:
|
Originally Posted by tomp
Either use the Bebe method of measuring, or you will need to provide and ask others the tire sizes to compare apples to apples!
|
I use that measurement because that's how Truxxx measures their torsion key lift.
If you measure from the center of the hub to the base of the fender, tire size has no effect on the measurement.
You should go no more than 3-3.5 turns from stock. If you get a longer travel shock or a shock extender you will be fine. Most of us have gone 2.5 to 3 full turns.
Edit: Link to instructions
http://www.truxxx.com/instructions/4...structions.pdf