[RichS]

It works! Thanks for the tip! I origianlly thought it was the wind guard for the sunroof, so I pulled it off and cleaned it up and siliconed it down . That wasn't it. So then I was convinced it was the front maker lights so I did the same thing. That wasn't it either. So after I read your tip I taped up the trim pieces and went for a drive and that was it. So I masked it up real good so I wouldn't get any silicone on the windshield and put down a beed of black silicone then screwed down the trim piecses. And it worked! Thanks again for the tip! The good news is now I have air-tight trim pieces, wind guard and marker lights!