right under the driver and passen seat area, Lay down in that area and you will see the cross bracket running across. the bolts are in the bracket. You can see the T-bars running down to that area. Jack up rig in the front middle to get front tires off the ground.(floor jack) ,,,mark adjustment bolts with a sharpie ,1 mark on bolt 1 mark on surrounding metal so lines match. Turn clockwise desired turns, Most are doing 2-1/2 turns,,me too. Drop jack and your done. You can measure here to see your results,, before and after, 2 turns is about 1 inch. If its a uneven measurement drive it first for a day or two and remeasure. I had to turn one of mine about a 1/4 turn more to match them up after a couple days.
|