Quote:
Originally posted by MONSTERMATT:
dont listen to any of these pricks, u can squeeze 37x13.50 r18 on, thats what i did- i cranked the torsion bars up all the way i just did it today as a matter of fact, before that they rubbed pretty bad on the right side and use a heat gun to push the wheel liners away from the tires they still rub a tiny bit but not anywhere near as bad as before, for 38 u most certainly need a lift and a 6inch fabtech is the best bet, if i ever lift i will definately do the gear thing and prolly supercahrge as well , but that is a dream right now, there are plenty of guys who run the lift with 38 in tires w/ no gear difference as for the best place to buy , just do a saerch bro
|
STFU. Don't be giving out any advice until you've earned some credit around here. Cranking the torsion bars all the way up is only asking for front drivetrain bind, so please report back to us in about 6 months when you are replacing your halfshafts or CVs or front driveshaft.
Forcing something that doesn't fit is just stupid. I have 37x12.5x17 and they rub on the sway bar and the frame. More rub and you will be binding the tires up and tearing up the steering, for what, to be a dumbass.
Dickhead.