[albertahummer]

hopefully your problem is gone, but if it isnt then there is an easy fix.
The starter is in behind your friont passenger wheel under and back of exhaust parts where the gasket is. Now there is a wire connected to the front end of the starter that is tigfhtened by a "approximately" 13 mm nut.
To tighten disconnect your positive battery post then untighten a little bit , clean or scrape connection point with screwdriver maybe, then tighten, and hook battery back up. Also easiest done when vehicle engine is cool because of proximity to exhaust. This is what i did and have not had the problem since with my H2 .