Quote:
|
Originally Posted by timgco
You have to get your wires into the engine bay. shortest distance is run down the A Pillars. Those plastic covers come off and there is room to run wires straight into your engine bay (outside of the truck). Your switch wires can be run into the engine bay the same way (outside of the truck) and than through the firewall.
OR
you can run switch wires through the boot inside that marker lamp and down into the cab. You can use the rear defroster or rear wiper fuse for your switch power. Hope that helps.
You can always pm me your info. and we can go through the process over the phone too. ..might be easier.
|
I was posting when you were posting... thanks.. I'll PM you!
I'd like to run just the wires from the lights to the engine bay, and do everything else from there.