[Luv2Camp]

So, today we returned home from a camping trip and the temps were in the 60's.. Decided to change the oil on the H2.. I change the oil twice per year with Mobil 1 synthetic... When the oil was draining, it was hardly flowing out. I put my finger in the hole and could feel something metal in there... CRAP.. So after several hours of trying to get the pan out (WHAT A PAIN THAT WAS!!) I finally was able to get the pan down enough to get my hand inside and pulled out part of the dipstick tube... About 3 years ago, I had the right side exhaust manifold replaced under warranty and they also had to replace the dipstick tube. The tech HAD TO KNOW that when he tried to remove the tube, it fell into the pan. Guess he decided better not to say anything and just let it ride. I am surprised it has taken this long for me to notice it. Glad I have it out of the pan now! Hoping that the pan gasket does not leak as I just bolted it right back up. Anyone have a trick to get the pan out??? I unbolted the transfer case, removed the cross member and tried to jack up the tranny but still was about 1/2 inch short of being able to pull the pan completely out. THANKS HUMMER OF COLUMBUS!