IF you ahve a GOOD local car audio shop where you live, they should be able to help with this issue. I have had 3 of the H2's already and have had video in each. I have tried putting the 7" monitor in place of the radio as seen in previous picture and relocating radio to onstar slot. This works well. I have also left the factory radio in place and added a motorized monitor only piece in place of the onstar, too low, this is not a useable location. The best and easiest solution is the in-dash motorized all in one unit that is offered by many companies. (Alpine, Pioneer, Clarion, Sony, Panasonic etc.) I am currently installing the Panasonic VAD9200 in my new H2 and I am going to try and mount it in the bottom part of the radio opening and relocate my onstar to the top of the opening. This will allow the display to open completely and not be affected by the air vents and also give me a place to install a center channel where the onstar was originally. Most screens have several different tilt angles, the Panasonic piece will tilt back all but the last position when mounted in the top of the opening.
I am in the Car Audio industry and have access to a lot of brands of audio, video and security if anyone is interested in adding to their H2.
|