|
#1
05-05-2008, 10:55 PM
Hummer Professional
Join Date: Jan 2005
Location: GAIN INFORMATION AND EDUCATION RELATING TO HUMMER H2\'S
Posts: 272
Door handle/insert problem
Hey all you techies..After having the BRUTE airbrushed back in March, (they disassembled and removed all hardware) my drivers side door handle and insert has become detached on one side of the handle. My question is, can this be fixed? If so, got any suggestions on how to remove the inside door panel to get at the door handle...As always, your help has proved invaluable..Thanks again, BRUTE
Last edited by H2BRUTE : 05-05-2008 at 10:59 PM.
#2
05-19-2008, 08:15 PM
Hummer Professional
Join Date: Jan 2005
Location: GAIN INFORMATION AND EDUCATION RELATING TO HUMMER H2\'S
Posts: 272
Re: Door handle/insert problem
Well, I finally decided to take the BRUTE back to the dealers to fix the door problem. Come to find out after they took the door panel off, the bolt holding the one side of the handle in was sheared off. According to them it was overtightened. Fortunately they looked around in the shop and found a used one which they installed at a minimal cost to me...Problem solved..BRUTE
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 11:44 PM.
Linear Mode
