Bulb change - filament to LED

[LoJac963]

Originally Posted by smileynialley

does anyone know how to access the light bulbs in the steering wheel?
The controls for the volume on the steering wheel do not light up anymore and i need to replace.

You have to pop each button pack out of the steering wheel. The button pack will wiggle forward with a small screwdriver then you need something to get behind it and release the clip holding the wires in. After that you can disassemble the button pack and put in whatever you want.

I changed every bulb in mine to LED, all the large interior bulbs and everything in the dash. For the steering wheel controls I believe you would need 12v LED's. I would also recommend a diffused lens for everything in the dash to prevent any hot spots.