Looking for a 2" lift

[Xplod]

I looking for a 2" suspension lift that can be fitted with Dual Fox Shocks with Piggybacks.

[Xplod]

I looking for a 2" suspension lift that can be fitted with Dual Fox Shocks with Piggybacks.

[Hummer Man]

Should be available from atleat 4 different manufacturers - Heads up :::: a good quality one is about $275.00 to $350 wholesale - so push these guyz so they don't rape you on the price!

[HUMMERDOGG]

HM-

Would you be kind enough to list any of those four manufacturers. I have been unable to find one yet.

-Wayne

[H2Doc]

Today I talked to someone at Fabtech (Chino, CA) - they make a 6 inch lift. I said that many H2 owners want a 2 inch lift including myself. He said that the H2 is a bear to lift and doubts that it would be possible to make a 2 inch. Fabtech uses new lower crossmembers that require 6 inch lift to install. He claims that the Fabtech lift gives better stability and better ride than Rancho 4 inch that uses coils. Maybe someone more informed could comment.

Brian
03 Pewter Lux, Airaid filter/MIT, Corsa Touring

[Detonate]

I really think the only way you are going to get a 2" lift is by cranking the torsion bars and adding a rear coil spring spacer.

-Jim March
Arlington TX
2003 Red H2
Beauty is in the eye of the Beer Holder

[5spd]

I wonder if Fabtech would donate a lift kit to one of the H2 owners here for a comprehensive test. Then that way we could get an honest opinion from an end user, be it good or bad. They must push it to the limits in all areas of 4wheeling and on some of the hardcore trails like Fordyce, Rubicon, JV, ect.....are you listinging Fabtech????

[Hummertime]

xplode if you find an answer (besides torsion crank/spacers)pleeeeeeaaaaassssseeee!!!!!! post it. i have exhausted my search.

Bone stock but dreamin!

[Hummer Man]

HUMMER DOG pICK up a copy of SUV OR TRUCKIN MAGAZINE and goto the back pages!

[Detonate]

Hummer Man, if they are listing 2" lifts in the <1000 range, they are probably the same Torsion/Spacer lifts like the ones that they used to try and sell on eBay for $500.

-Jim March
Arlington TX
2003 Red H2
Beauty is in the eye of the Beer Holder

[H2 Daddy]

On a different thread I suggested everyone who wants a 2" lift should e-mail Rancho and ask for one. If enought people e-mail then maybe they will make one. It will only take a minute to do. I sent my e-mail in. http://www.gorancho.com/mail/contactus.stm

[Detonate]

Done

-Jim March
Arlington TX
2003 Red H2
Beauty is in the eye of the Beer Holder

Ditto the Done - I would love a 2" lift



"It's what you learn, after you know it all, that counts - John Wooden

[Hummer Man]

Detonat, they are just the spacer lifts like you say - but what is wrong with those! A 2" lift is essentially for looks! There is no offroad advantage to speak of. Those spacer lifts cost about $39.00 to $79.00 to manufacture. Wholesale is in the $250 range.

[Hummertime]

just emailed rancho...they have the demand...now see if they can supply

Bone stock but dreamin!

[H2Oguy]

I emailed Rancho last week from a prior discussion about this and suggestion to hit them with request. The more the better obviously but I got a reply back that simply stated we do not make a 2" lift. Hopefully they will change their minds with enough people asking.
In the meantime I am talking with a performance shop who really knows what they are talking about and we are going to see what it would take to make or modify a lift kit. If anyone does go with just the "torsion lift" or just trying to get it out of bigger shocks be careful when going off road because in doing this you are extending the reach of the half shaft and increase the chance for it to break.

www.h2-outfitters.com