|
#1
12-28-2004, 05:48 PM
Join Date: Aug 2003
Location: \"Lost Wages\"
Posts: 1,150
I've read many posts about rattles, especially in the rear. I developed several and pulled off the inside panel. There are several components for wipers, locks, etc. with linkages that ALL were rattle sources. I took a big square of semi-hard upholstery padding and attached it to the entire center section with contact cement. Be sure it's thick enough to cushion but not restrict. Put the panel back on and now quiet as a church mouse. Just thought it might help for those with rattles in the rear.
__________________
Jonahs
#2
12-28-2004, 05:48 PM
Join Date: Aug 2003
Location: \"Lost Wages\"
Posts: 1,150
I've read many posts about rattles, especially in the rear. I developed several and pulled off the inside panel. There are several components for wipers, locks, etc. with linkages that ALL were rattle sources. I took a big square of semi-hard upholstery padding and attached it to the entire center section with contact cement. Be sure it's thick enough to cushion but not restrict. Put the panel back on and now quiet as a church mouse. Just thought it might help for those with rattles in the rear.
__________________
Jonahs
#3
12-28-2004, 05:48 PM
Join Date: Aug 2003
Location: \"Lost Wages\"
Posts: 1,150
I've read many posts about rattles, especially in the rear. I developed several and pulled off the inside panel. There are several components for wipers, locks, etc. with linkages that ALL were rattle sources. I took a big square of semi-hard upholstery padding and attached it to the entire center section with contact cement. Be sure it's thick enough to cushion but not restrict. Put the panel back on and now quiet as a church mouse. Just thought it might help for those with rattles in the rear.
__________________
Jonahs
#4
12-28-2004, 09:53 PM
Hummer Guru
Join Date: Nov 2003
Location: Yes..I really moved outta Texas!!
Posts: 2,605
Make sure it doesn't restrict motion of any of the components, and won't over heat your wiper motor!
But if it works...DO IT!
Ric-H2
__________________
If you can't be a good example...Then you might as well be a horrible warning!
www.meatspin.com
#5
12-29-2004, 05:27 PM
Hummer Veteran
Join Date: Sep 2004
Location: up a monkeys butt !
Posts: 59
I had a rattle in the over head console , I fixed this by taking my sunglasses out of it
Two twelve inch subs and a couple thousand watts of power tends to point out most rattles in the truck 
__________________
I like monkeys !
05 yellow H2
Gobi Rack
Stuff !
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 01:27 AM.
Linear Mode
