|
|
12-09-2012, 03:11 PM
|
|
Hummer Veteran
|
|
Join Date: Apr 2012
Posts: 97
|
|
3rd transfer case seal in a year!
I have a recurring leak coming from the transfer case. The seal to the prop shaft at the rear is wearing away stupidly fast and causing transmission fluid to leak everywhere.
When I put my foot on the gas pedal, before the car moves i get a clunk. The same clunk happens when i sharply take my foot off the gas too.
Could this be linked with the seal leaking?
Any help would be great,
thanks
|
12-09-2012, 07:48 PM
|
|
Hummer Veteran
|
|
Join Date: Apr 2012
Posts: 97
|
|
Re: 3rd transfer case seal in a year!
done some digging on the web and found a suggestion that replacing the prop shaft with a longer version (part no 15207223) will cure the clunk problem. obviously the clunk isn't the problem, the worn seals are the problem. would this be helpful?
|
12-10-2012, 02:31 PM
|
|
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
Re: 3rd transfer case seal in a year!
The clunk is normal for GM trucks. A longer prop is not good idea as it has to move in/out due to suspension travel in rear. The prop is causing early seal failure because small rocks and dirt get trapped in there and wear grooves in prop shaft. Simply replace prop with new OEM shaft and seal and problem will be resolved.
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
12-10-2012, 04:48 PM
|
|
Hummer Veteran
|
|
Join Date: Apr 2012
Posts: 97
|
|
Re: 3rd transfer case seal in a year!
ok cheers mate. I'll get myself a replacement prop (can only get 2nd hand over here so hopfully it will be ok). Would the bearing inside the transfer case need rpelacing?
|
12-10-2012, 11:15 PM
|
|
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
Re: 3rd transfer case seal in a year!
Might check with any local GM deal to determine part availability. The bearing should be fine and no need to replace it unless you remove it.
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
12-11-2012, 05:46 PM
|
|
Hummer Veteran
|
|
Join Date: Apr 2012
Posts: 97
|
|
Re: 3rd transfer case seal in a year!
we dont have GM over here.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 06:51 PM.
|