|
|
09-29-2005, 06:22 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
I've been asked by a lot of board members about the location of the holes in my winch cradle.
I'm attaching pictures of the holes I drilled in my cradle. I drilled the holes to pull the cradle in as close as possible to the bumper without any rubbing.
Here is the vertical hole I drilled for the front cradle. The hole I use for the hitch pin is the hole underr the "ty" the other 2 holes to the right were the "stock" holes that left the cradle sticking way too far out.
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-29-2005, 06:22 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
I've been asked by a lot of board members about the location of the holes in my winch cradle.
I'm attaching pictures of the holes I drilled in my cradle. I drilled the holes to pull the cradle in as close as possible to the bumper without any rubbing.
Here is the vertical hole I drilled for the front cradle. The hole I use for the hitch pin is the hole underr the "ty" the other 2 holes to the right were the "stock" holes that left the cradle sticking way too far out.
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-29-2005, 06:26 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
Here is the offset for the horizontal hole used to mount the hitch in the rear.
Both of these postitions give about 1/8" of wasted stickout... which is not very much!
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-29-2005, 06:28 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
Here is a picture of the elusive GM front "hitch pin".
My dealer told me it didn't exist until one of the board members here gave me the GM part number....
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-29-2005, 06:44 PM
|
Hummer Guru
|
|
Join Date: Dec 2004
Location: The Green Mountains
Posts: 2,823
|
|
What no hundreds?
__________________
'05 Stealth Gray SUT
A Mellow Mix of Black & Bling
|
09-29-2005, 07:37 PM
|
Hummer Expert
|
|
Join Date: Jan 2005
Location: easbumfuk
Posts: 859
|
|
what did you make first the fiftys or the winch mount.
|
09-29-2005, 07:53 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
This is a no win situation...
The truth is that it was the only thing I had in my pocket...
Oh yeah... and the holes are all 5/8ths.
Here... let me give you a puzzle to figure out:
How or what am I going to be using these snorkles for on my H2? (I really will be installing these... can you guess what they are for?)
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-30-2005, 11:27 AM
|
Hummer Guru
|
|
Join Date: Nov 2002
Location: Cognito
Posts: 2,155
|
|
Hmmm, I say its some kind of diverter tube so that when the money falls out of your ass it goes through the tube and into some kind of receptacle to catch it.
|
09-30-2005, 12:13 PM
|
|
Hummer Deity
|
|
Join Date: Feb 2005
Location: In the basement of the Alamo
Posts: 10,855
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by shipbldr:
How or what am I going to be using these snorkles for on my H2? (I really will be installing these... can you guess what they are for?) </div></BLOCKQUOTE>
Marijuana?
(All those hundreds and you're drinking "Dr. Thunder"? )
|
09-30-2005, 02:03 PM
|
|
Hummer Expert
|
|
Join Date: Jul 2005
Location: Colorado
Posts: 671
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h2co-pilot:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by shipbldr:
How or what am I going to be using these snorkles for on my H2? (I really will be installing these... can you guess what they are for?) </div></BLOCKQUOTE>
Marijuana?
(All those hundreds and you're drinking "Dr. Thunder"? ) </div></BLOCKQUOTE>
No kidding! $10k on an air horn prototype and he's drinking Dr Thunder? I guess its all about priorities
|
09-30-2005, 03:39 PM
|
|
Hummer Veteran
|
|
Join Date: Jan 2004
Location: Fort Sill, OK USA
Posts: 169
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dan:
Hmmm, I say its some kind of diverter tube so that when the money falls out of your ass it goes through the tube and into some kind of receptacle to catch it.
</div></BLOCKQUOTE>
Hah - reminds me of the Money out of the Wazoo E-Trade Superbowl ad (hit the 2000 tab - second E-Trade ad)...then I got a few laughs looking at some of the other old ones.
__________________
03 Yellow Adventure
97 SS Camaro SLP Build # 2919
|
09-30-2005, 04:25 PM
|
|
|
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
|
|
The 10K was for the aircompressor design.
The horn design changes... the factory ate the cost of those. Now I just need to figure out what to do with 350 of air horns...
...besides installing ALL of them on my Gobi rack!
(what a mental picture that is!!)
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|
09-30-2005, 05:14 PM
|
Hummer Guru
|
|
Join Date: Dec 2004
Location: The Green Mountains
Posts: 2,823
|
|
I thought that was the stuff they found with Saddam.
__________________
'05 Stealth Gray SUT
A Mellow Mix of Black & Bling
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 04:25 PM.
|