Front Diff mount bushing assy

[cmd]

I removed my front crossmember with the rear diff mount and noticed with the diff hanging on the front mount that there was a lot of play, should there be a significant amount of play at the front mount?

Thanks

[dochummer]

When I removed mine I noticed that there was some play. There are two other bolts holding it up, so I wouldn't worry too much about it - unless those bolts are really loose.... Just my 2 cents..

[Yetti]

I think you will find if the bushing sleeve was tight then the bushing will loosen with time. the flip side is if the sleeve in the bushing is loose then it will groan and make noise. make sure the bolts to the frame are tight to spec. as for the flat mount on the right side its serviced with both bushings installed. so if its that, just replace as needed.