 |
|
10-20-2005, 04:14 AM
|
 |
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
Hi all,
I just put in a TrueFlow direct filter replace, and the Check engine light came on. I disconnected the battery ground wire for about an hour the light stay on. So i disconnected again all night. The light was gone but came back 10 min. later. The H2 drives really bad it would hestitate . Anybody had this same problem after install a new intake or direct replace filter. Please HELP
Thanks
__________________
05 Lux Suv
95 Ducati 916
|
10-20-2005, 04:14 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
Hi all,
I just put in a TrueFlow direct filter replace, and the Check engine light came on. I disconnected the battery ground wire for about an hour the light stay on. So i disconnected again all night. The light was gone but came back 10 min. later. The H2 drives really bad it would hestitate . Anybody had this same problem after install a new intake or direct replace filter. Please HELP
Thanks
__________________
05 Lux Suv
95 Ducati 916
|
10-20-2005, 04:35 AM
|
|
|
|
Join Date: Feb 2005
Location: Vegas
Posts: 1,571
|
|
__________________
\'05 SUT
|
10-20-2005, 04:39 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
Thank for the quick respone. I will check the filter I installed right out of the box it was pre-oiled.
__________________
05 Lux Suv
95 Ducati 916
|
10-20-2005, 04:41 AM
|
|
|
|
Join Date: Feb 2005
Location: Vegas
Posts: 1,571
|
|
Well, let's see how relevant the offered answer is.
That's the danger of posting late at night -- only the loons are around. 
__________________
\'05 SUT
|
10-20-2005, 05:04 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
Hahha one's better than no one
__________________
05 Lux Suv
95 Ducati 916
|
10-20-2005, 02:49 PM
|
|
Hummer Professional
|
|
Join Date: Feb 2003
Location: Palm Desert, CA
Posts: 470
|
|
I just installed the Tru Flow too and it was soaking in oil in the bag! I used paper towels to soak it up and then installed it. Even after that I have some oil that has puddled below the filter! It will definitely throw a code. Just get some carb cleaner and clean off the wires in the MAF sensor and you should be o.k.
__________________
2003 H2 Hummer, Yellow,Polished Whipple Supercharged, Dynatech long tube headers, catback,18\" Ambush w/Toyo MT\'s,lots of goodies!
Y2K Corvette Millennium Yellow Convert/Blk/Blk, B&B headers, B&B Tri-Flo\'s, H-Tech MAG,GMS MAF, RM Racing TwinFlow.
1994 Chev Suburban Blown
1970 Trans Am balanced, blueprinted, ceramic headers, etc.
|
10-21-2005, 04:58 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
Thanks for all the responses, I took the filter out and soaked up the oil and clean and wipe the MAF. That fixed it. One questin about cleaning the MAF with carb cleaner, do you just spray it directly into the MAf??
__________________
05 Lux Suv
95 Ducati 916
|
10-21-2005, 05:02 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: SoCal
Posts: 95
|
|
H2 Bill,
Do you just have the Trueflow filter or the intake tube too. Look for the intake tube but can't find it for TrueFlow. The Airaid is not completely round it's flatten out at the end.
__________________
05 Lux Suv
95 Ducati 916
|
10-21-2005, 01:00 PM
|
|
Hummer Guru
|
|
Join Date: Nov 2002
Location: Cognito
Posts: 2,155
|
|
I was going to suggest checking the engine, but it sounds like you have it figured out.   |
10-21-2005, 03:03 PM
|
|
Hummer Professional
|
|
Join Date: Feb 2003
Location: Palm Desert, CA
Posts: 470
|
|
Nixxxster I hve the AirRaid tube and it all works fine. No problem at all with fit.
__________________
2003 H2 Hummer, Yellow,Polished Whipple Supercharged, Dynatech long tube headers, catback,18\" Ambush w/Toyo MT\'s,lots of goodies!
Y2K Corvette Millennium Yellow Convert/Blk/Blk, B&B headers, B&B Tri-Flo\'s, H-Tech MAG,GMS MAF, RM Racing TwinFlow.
1994 Chev Suburban Blown
1970 Trans Am balanced, blueprinted, ceramic headers, etc.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 08:43 PM.
|
