![]() |
another wheel thread
I'm looking for a 18" wheel that won;t stick waayyyy out and doesn;t cost nearly what the stock 18's do. Over $400 each and than I have to PC them on top of that.
I have a set of 5 35 12.50 18 Toyo MT's already to throw on there.
Here's the specs on the rim. I'm assuming I need Hub centric on the H3??
ART # SIZE BACK OFFSET BOLT CAP BORE LOAD SHIPPING
PART # SIZE BACK OFFSET BOLT CAP BORE LOAD SHIPPING
size 18x8.5
back space 5 3/4
Off set +25
bolt pattern 6-5.5hc
cap89-9184
bore 78mm
load rate 2200
weight 31
TAIL RATED!
Re: another wheel thread
Stock BS is 5"or 5.5". The center bore is 100.6mm.
It's going to be hard to find a hub-centric wheel for the H3. Especially since most sites don't list it in the specs. You'll most likely have to get a lug-centric wheel with a 108mm center and use hub rings if you end up with vibration. Wheels for a 6-lug Toyota will usually work, just check the backspacing.
Re: another wheel thread
Stock BS is 5"or 5.5". The center bore is 100.6mm.
It's going to be hard to find a hub-centric wheel for the H3. Especially since most sites don't list it in the specs. You'll most likely have to get a lug-centric wheel with a 108mm center and use hub rings if you end up with vibration. Wheels for a 6-lug Toyota will usually work, just check the backspacing.
Here's the smae rim with a 108mm with 5 1/8" bs.
175-8883B 18x8.5 5 1/8 +10 6-5.5 89-8126 108mm 2200 31
http://www.ultrawheel.com/wheel_deta...brand=1&id=190
IS this worth ordering and giving it a shot or do I need to be 4 3/4 bs or somewhere around there? I have a VM into Ultra now to see what they say.
TAIL RATED!
Re: another wheel thread
The second size you posted should fit. You'll probably getting rubbing at full lock, same as you would with the stock wheels and 35's.
Re: another wheel thread
white 03 lux-gone
black 06 lux sut
Thread Tools
Search this Thread
Display Modes
Posting Rules