 |
|
09-21-2005, 12:28 AM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
I'm planning a party that will require home made hard candy "straws" or "sticks". I need to design a custom mold that looks like the picture below, at least 25 valleys wide with a 15 inch length. It will need to be metal because I will be making the straws with 300+ degree sugar solution and I don't want the material to melt. The idea is to pour the solution into the depressions and allow to cool.
I need material suggestions as well as suggestions on what kinds of tools to use. The metal has to be plyable enough to manipulate by hand because I don't have access to any machinery.
J.
|
09-21-2005, 12:28 AM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
I'm planning a party that will require home made hard candy "straws" or "sticks". I need to design a custom mold that looks like the picture below, at least 25 valleys wide with a 15 inch length. It will need to be metal because I will be making the straws with 300+ degree sugar solution and I don't want the material to melt. The idea is to pour the solution into the depressions and allow to cool.
I need material suggestions as well as suggestions on what kinds of tools to use. The metal has to be plyable enough to manipulate by hand because I don't have access to any machinery.
J.
|
09-21-2005, 01:41 AM
|
 |
Banned
|
|
Join Date: Jan 2003
Posts: 24,247
|
|
What are they for? your illustration doesn't allow for conformity all the way around the stick. It also is not a "straw.
If you need them round. You could get two pieces of metal that would bolt together. Long 15" wide and long enough to accomodate 25 holes.
Tightly bolt the two pieces so that they are mated together and get a long shank drill bit. Drill your holes verticaly from the ends down the 15" length with the center of the bit lining up with the seam.
You take it back apart and clean it up and all that, bolt it back together, fill it with your solution, bake it or whatever (I'm sure you need to coat it with something) after it cools, unbolt it and pull the halves apart and voila, round sticks.
|
09-21-2005, 03:18 AM
|
|
Hummer Expert
|
|
Join Date: Aug 2004
Location: Kansas City
Posts: 963
|
|
You've been watching MacGyver re-runs haven't you.
__________________
'04 H2
'07 Vette
|
09-21-2005, 04:40 AM
|
 |
Hummer Messiah
|
|
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
|
|
J, would "wood" work? It's good enough for ka-bobs.
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
|
09-21-2005, 10:40 AM
|
|
Banned
|
|
Join Date: Jan 2003
Posts: 24,247
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Marcmedic:
You've been watching MacGyver re-runs haven't you. </div></BLOCKQUOTE>  |
09-21-2005, 11:10 AM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by PARAGON:
What are they for? your illustration doesn't allow for conformity all the way around the stick. It also is not a "straw. </div></BLOCKQUOTE>
Since they are hard candy they will be used for eating . I used the term "straw" to give you an idea of the shape I needed. Having a mold to allow for a hollow center is not my intent.
What I'm looking for is the best option of a sheet metal to bend or fold into the shape above that will not buckle with the heat.
J. |
09-21-2005, 11:51 AM
|
 |
Hummer Deity
|
|
Join Date: Feb 2005
Location: In the basement of the Alamo
Posts: 10,855
|
|
Copper is pretty bendable isn't it?
Did you want a triangular look or did you want round? I have candy molds somewhere that allowed something similar but rounded and flat on top obviously. You could also pipe them on foil but they will not be uniform.
Joyce, this is sooo Martha.  |
09-21-2005, 11:57 AM
|
 |
Hummer Authority
|
|
Join Date: Aug 2003
Location: San Antonio
Posts: 1,635
|
|
__________________
People Who Annoy Me...NAGGERS
|
09-21-2005, 12:00 PM
|
|
Hummer Deity
|
|
Join Date: Feb 2005
Location: In the basement of the Alamo
Posts: 10,855
|
|
|
09-21-2005, 12:07 PM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
Yeah, I thought about copper but I'm cheap and would exhaust all other options before spending money on a copper sheet.
The shape round vs. triangular doesn't really matter, either would work fine. As long as the "sticks" are all the same shape.
I did a test batch 2 nights ago but poured the liquid onto a sheet of alumnium foil in long sugar strips. They spread before cooling, hence my desire for a mold to prevent this.
J.
PS Marthas' got nothing compared to my skillz!! |
09-21-2005, 12:30 PM
|
|
Hummer Deity
|
|
Join Date: Feb 2005
Location: In the basement of the Alamo
Posts: 10,855
|
|
|
09-21-2005, 12:37 PM
|
|
Hummer Deity
|
|
Join Date: Feb 2005
Location: In the basement of the Alamo
Posts: 10,855
|
|
Hey, I bet if you send Seth to the hardware store he can find a metal accordion type mold. I saw this online, it is a shutter system thingy.
|
09-21-2005, 12:48 PM
|
|
|
|
Join Date: Feb 2005
Location: Vegas
Posts: 1,571
|
|
That shutter thing looks like a metal windshield sunshade. Wonder if you could attach foil to a flat, cardboard sunshade, then compress the accordion/sunshade to the desired size?
Also, I remember from years ago hard candy on string. Dip the string, let cool, repeat until desired diameter is reached. Kinda like rubber-coating the handle of a tool...
__________________
\'05 SUT
|
09-21-2005, 12:56 PM
|
 |
Hummer Guru
|
|
Join Date: Apr 2005
Location: Orlando, FL
Posts: 6,358
|
|
Couldn't you take a straw or something of the desired size, wrap it in aluminum foil and pull it out. You would have to make sure you close off one end so it doesn't drain out. This would give you the shape and size you want and you would have a little mold. Just make as many as you need, find something to stand them up in the oven (block of wood with holes drilled in it) and bake. After they cool, unwrap the foil and you have your sticks.
__________________
I don't care about the "Jeep thing"  as long as my mail is on time!!!
Slate Blue H3 Adventure w/sunroof, Monsoon/NAV, DVD and marker lights
|
09-21-2005, 01:49 PM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummerNewbie:
Couldn't you take a straw or something of the desired size, wrap it in aluminum foil and pull it out. You would have to make sure you close off one end so it doesn't drain out. This would give you the shape and size you want and you would have a little mold. Just make as many as you need, find something to stand them up in the oven (block of wood with holes drilled in it) and bake. After they cool, unwrap the foil and you have your sticks. </div></BLOCKQUOTE>
This is an interesting idea, but the foil tube (even multiple layers) may not stand up to the extremly hot sugar liquid I will be pouring in. Also, the tubes don't have to go into the oven to bake just sit to allow the mixture to harden and come to room temperature.
J.
|
09-21-2005, 02:03 PM
|
 |
Hummer Messiah
|
|
Join Date: Nov 2002
Location: PDX
Posts: 2,367,817
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h2co-pilot:
Copper is pretty bendable isn't it?
</div></BLOCKQUOTE>
The word you were looking for was malleable.
J, I'll call you. Get ready. |
09-21-2005, 02:20 PM
|
|
Hummer Guru
|
|
Join Date: Apr 2005
Location: Orlando, FL
Posts: 6,358
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by jfox:
This is an interesting idea, but the foil tube (even multiple layers) may not stand up to the extremly hot sugar liquid I will be pouring in. Also, the tubes don't have to go into the oven to bake just sit to allow the mixture to harden and come to room temperature.
J. </div></BLOCKQUOTE>
I see. The foil tube could be hard to pour the hot sugar liquid into also. 
__________________
I don't care about the "Jeep thing" as long as my mail is on time!!!
Slate Blue H3 Adventure w/sunroof, Monsoon/NAV, DVD and marker lights
|
09-21-2005, 02:32 PM
|
|
Banned
|
|
Join Date: Jan 2003
Posts: 24,247
|
|
Run over to Nasa and get you some aerogel. Poke some holes down into it with a pencil or something and pour away. |
09-21-2005, 02:36 PM
|
|
Hummer Professional
|
|
Join Date: Jul 2004
Posts: 319
|
|
Ohhh, a call from DRTY. I know I'm special now. I'm away from my phone, call me after 2.
J. |
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 01:11 AM.
|
