|
|
02-20-2004, 08:52 PM
|
|
|
Join Date: Dec 2003
Location: Oxnard, CA
Posts: 6
|
|
I came across this post on another H2 forum and thought you may find this interesting since people were wondering what the dyno numbers were. Looks like the dyno number previously posted were inaccurate. In case you were wondering who's post I copied and pasted, it was by Shawn over at www.thelapd.com
SoCalH2
We put our 2004 bone stock H2 on our 4WD Dynojet this morning and here are the numbers.
First Run: 154.86 total hp at all four wheels/234.74 total tq at all four wheels.
Second Run: 161.57 total hp at all four wheels/239.29 total tq at all four wheels.
Last Run: 171.52 total hp at all four wheels/251.46 total tq at all four wheels.
Even though the H2 is stock, it is running VERY lean throughout the RPM band on the air/fuel graph.
We will dyno tune it within the next week and release the new power numbers.
You now have real world dyno numbers that your H2 puts out more or less.
Just thought you guys would be interested!
I ALSO HAVE VIDEO OF ALL THREE DYNO RUNS, BUT I DON'T KNOW HOW TO POST THEM FOR YOU TO SEE. If someone emails me while I am here at work, I can email you the video files so we can get them posted.
Thanks!
Shawn
|
02-20-2004, 08:52 PM
|
|
|
Join Date: Dec 2003
Location: Oxnard, CA
Posts: 6
|
|
I came across this post on another H2 forum and thought you may find this interesting since people were wondering what the dyno numbers were. Looks like the dyno number previously posted were inaccurate. In case you were wondering who's post I copied and pasted, it was by Shawn over at www.thelapd.com
SoCalH2
We put our 2004 bone stock H2 on our 4WD Dynojet this morning and here are the numbers.
First Run: 154.86 total hp at all four wheels/234.74 total tq at all four wheels.
Second Run: 161.57 total hp at all four wheels/239.29 total tq at all four wheels.
Last Run: 171.52 total hp at all four wheels/251.46 total tq at all four wheels.
Even though the H2 is stock, it is running VERY lean throughout the RPM band on the air/fuel graph.
We will dyno tune it within the next week and release the new power numbers.
You now have real world dyno numbers that your H2 puts out more or less.
Just thought you guys would be interested!
I ALSO HAVE VIDEO OF ALL THREE DYNO RUNS, BUT I DON'T KNOW HOW TO POST THEM FOR YOU TO SEE. If someone emails me while I am here at work, I can email you the video files so we can get them posted.
Thanks!
Shawn
|
02-21-2004, 01:28 AM
|
|
|
Join Date: Dec 2002
Posts: 45
|
|
Wow! That seems real low. Could drivetrain loss be that high?
__________________
Hood Motorsports
- 1967 427 L71 Corvette (99%+ Bloomington Gold Certified, restored to original)
- 1998 Lingenfelter 383 C5 (over 500hp and 11\'s in the 1/4 mile)
- 2001 GMC Yukon Denali (22\" wheels and tires, extensive multimedia system, and per
|
02-21-2004, 01:51 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2002
Location: CSA
Posts: 2,511
|
|
This Hypertech chart looks closer to the truth.
Klaus
Rare 2003 H2 with UM8 Integrated Navigation Radio
Skull & Bones Member since 2003
|
02-21-2004, 02:39 AM
|
|
Hummer Messiah
|
|
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
|
|
socal:
FYI, thelapd disappeared from this site very quickly after some questioning.
And Klaus is THE AUTHORITY.
Black Lingenfelter Lux
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
|
02-23-2004, 11:30 PM
|
|
|
Join Date: Dec 2003
Location: Oxnard, CA
Posts: 6
|
|
KenP,
FYI, I finally spoke with someone over at LAPD today and they said they were not allowed to post because the owner of this board saw them as competition because LAPD sells SMA stuff and so does the owner of this board. At any rate, they seem to know what they are doing and are the only ones in SoCal with a 4WD Dynojet. They could have shared good info with us, but oh well.
It seems like the Hypertech graph shows one thing and that is to convince you to buy their crap programmer that doesn't provide any gains unless you own a Diesel truck. Hypertech also doesn't say which Dyno they used. Their numbers sound very close to the shop that dynoed an H2 with only the rear wheel rollers which is not going to be accurate.
The numbers don't seem off especially when you consider the drivetrain loss on an AWD vehicle that really doesn't have that much power to begin with.
At any rate, LAPD does have a good reputation in the Corvette community and does seem to do a good job in tuning.
Bottom line is that someone over at LAPD took the time to speak with me and help me out with questions that I had and it doesn't make sense to pretty much bash them when they have an overall great reputation.
Just something to think about and always remember there is always two sides to every story.
SoCalH2
|
02-24-2004, 12:11 AM
|
|
Hummer Messiah
|
|
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
|
|
I am glad they took the time for you.
If you read my very short post carefully you will realize I did not bash them. I did not question their reputation. Nor did I take sides with anything.
I merely stated a fact, they were questioned and disappeared from the site.
Now that I know the "facts" as you state them I can say Good. I am sure you must agree Jason does not need competition on his own site.
Again, to be perfectly clear, read my post again and you will see I did not bash that company.
Black Lingenfelter Lux
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
|
02-24-2004, 02:03 AM
|
|
|
Join Date: Jan 2004
Location: Windsor, Ontario
Posts: 55
|
|
This is from the rear wheels only which will read higher but can be used as a comparison. Phil at Dynotech Engineering said the drivetrain creates a huge loss in power.
JOe
|
02-24-2004, 02:22 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2002
Location: CSA
Posts: 2,511
|
|
Cruzmisl,
The figures in your chart look about right. Somewhere around 350HP with a bolt-on supercharger, adding about 100HP from stock.
If I ever hit the lottery, I'm going to get a ZZ572/620 installed.
http://www.greenwoodchevy.com/engine15.htm
Klaus
Rare 2003 H2 with UM8 Integrated Navigation Radio
Skull & Bones Member since 2003
|
02-24-2004, 02:27 AM
|
|
Hummer Authority
|
|
Join Date: Jan 2004
Location: Home is where the H2 is..
Posts: 1,814
|
|
Klaus, at the Chrysler/Dodge dealership this weekend I saw a Viper powered Ram truck producing about 500hp. Sticker is $49K + $10K over. U should test drive one
04 Pewter
|
02-24-2004, 02:43 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2002
Location: CSA
Posts: 2,511
|
|
Sounds nice, but I really like sleepers. While I enjoyed the Corvette I traded in for the H2, my favorite was my 1973 Ford Mustang Mach 1. I built a 429 Cobra-Jet motor and installed it in the car. I did not put any markings of what was under the hood on the car. This was in 1979-80.
Needless to say - I surprised many a Vette and Z28 with that car. I LOVE big block motors.
Klaus
Rare 2003 H2 with UM8 Integrated Navigation Radio
Skull & Bones Member since 2003
|
02-24-2004, 12:14 PM
|
|
Banned
|
|
Join Date: Jan 2003
Posts: 24,247
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Klaus:
Needless to say - I surprised many a Vette and Z28 with that car. I LOVE big block motors.
<HR></BLOCKQUOTE>There's no good replacement for displacement.
|
02-29-2004, 12:52 PM
|
Hummer Professional
|
|
Join Date: Mar 2003
Location: N.CENTRAL OHIO
Posts: 474
|
|
I'd settle for a Duramax,a programmer stacked w/ another box,nitrous and propane.
Who wouldn't want 700+ hp
Yell'r 04 Lux w/ air, sunroof,F&R brush bars
04 Chevy D/A CC SLT LB
__________________
07 White H3 Adventure w/ some black stuff
04.5 GMC D/A CC SLT LB EFI LIVE tuned
98 ZR-2 Blazer
Ex H2&3 owner
My hiking boots and canoe paddle have more miles than most 'offroad' vehicles, over 350 in last year.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 08:11 AM.
|