|
|
05-18-2012, 11:55 PM
|
|
Hummer Expert
|
|
Join Date: Dec 2007
Posts: 705
|
|
Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
|
05-19-2012, 12:02 AM
|
Hummer Veteran
|
|
Join Date: Jul 2005
Posts: 80
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
I dig it. I've been curious how this combo would look. Looks mean as hell.
__________________
2005 Black LUX
37x13.50R17 Toyo MT
Torsion keys. 2" rear coil spacers
2" wheel spacers
In Tune I2, Air Raid Filter, Air Raid MIT, throttle body bypass, straight pipe exhaust
Cognito UCAs. Kryptonite UCA ball joints. Kryptonite tie rods. Kryptonite death grip Idler. Moog HD pitman.
5.13 gears. E-locker front
Bilstein stabilizer
|
05-19-2012, 12:04 AM
|
|
Hummer Expert
|
|
Join Date: Dec 2007
Posts: 705
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
Adapter plate that was made to work w/ the bumper
I was going to put that Rigid 20" light bar under the winch where that damn logo is, but it looks alot better above the bumper.
I'm **** canning that logo...
Small light hole will be filled, larger curcular will be shrunk down and square. Light bar will be centered in that opening- Mounted to the hunge so it flips w/ the hood.
|
05-19-2012, 12:10 AM
|
|
Hummer Expert
|
|
Join Date: Dec 2007
Posts: 705
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
bumper corners will be extended out to protect the flairs...
Rear Bumper will have matching style corner guards.
About 30 other mods going on I'll get into later...
Bumper and brush guard was provisioned for a 2" body lift...Just havn't made a final decision if I want to add more height to the truck yet.
|
06-03-2012, 10:32 AM
|
|
Hummer Authority
|
|
Join Date: Aug 2007
Location: Hingham MA. / Durham NC.
Posts: 1,457
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
Did they sell you those bumpers without being fully welded? Great work by the way, but not sure how you are going to adapt the front bumper to work with a 2" body lift???
(unless you cut the frame and raise it up 2" in the front)
|
06-03-2012, 10:40 AM
|
|
Hummer Authority
|
|
Join Date: Aug 2007
Location: Hingham MA. / Durham NC.
Posts: 1,457
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
|
06-04-2012, 07:48 PM
|
Hummer Veteran
|
|
Join Date: Jul 2005
Posts: 80
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
I believe you can choose to weld the bumpers yourself for a slightly discounted price. As I want to add a 2" body lift that should make it easier to get things looking sharp.
__________________
2005 Black LUX
37x13.50R17 Toyo MT
Torsion keys. 2" rear coil spacers
2" wheel spacers
In Tune I2, Air Raid Filter, Air Raid MIT, throttle body bypass, straight pipe exhaust
Cognito UCAs. Kryptonite UCA ball joints. Kryptonite tie rods. Kryptonite death grip Idler. Moog HD pitman.
5.13 gears. E-locker front
Bilstein stabilizer
|
06-04-2012, 11:42 PM
|
|
Hummer Expert
|
|
Join Date: Dec 2007
Posts: 705
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
Quote:
Originally Posted by Bimmer9938
Did they sell you those bumpers without being fully welded? Great work by the way, but not sure how you are going to adapt the front bumper to work with a 2" body lift???
(unless you cut the frame and raise it up 2" in the front)
|
Front and rears pre bent in about 30 pieces was $700 carry out in chicago. I have changed a number of things on the kit- whats pictured is about 85% of what you get.
Bumpers would stay in the existing spot. Winch and brush guard are both custom mounted to the frame also. I didn't want to have anything pulling on the bumper itself. I have a filler that would just get welded on top of the bumper. You'd never be able to tell its a filler panel after the welds were ground down and painted. Brush guard would get holes drilled equal height of the body lift to raise that also.
|
07-25-2012, 03:53 AM
|
Hummer Veteran
|
|
Join Date: Oct 2010
Posts: 96
|
|
Re: Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs
Mud, any finished pictures yet?
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 10:25 AM.
|