Maybe Previously intended for lights/spots.
I didn't dare remove to see what they hide!
You're all wrong. Those covers are there for a special kind of clip. To remove the B Pillar without breaking it, you need to remove the cover and then remove the screw. Leave the clip in the sheet metal for re-installation. Attempting to remove the trim without removing the cover and the screw will BREAK the trim to the extent that it will have to be replaced.
Now, for the 64,000 dollar question:"Why is it there???"
It is a special attachment system that is used exclusively for roof rail airbags (the kind that drop down over the window glass in an impact. While they are not currently available, GM asked that we design the trim system to be "package protected" for them ... so they could add them with a minimal amount of change in the future.
***BLANK*** at this time
Founding member of the \"No Hummer Krew\"
The lack of any airbags at all is top on the list of what prevented me from buying the H1 all these years.
Why didn't we get side airbags?! I was vey disappointed to learn they were not only not standard, but not even available as an option! Argh.
The lack of any airbags at all is top on the list of what prevented me from buying the H1 all these years.<HR></BLOCKQUOTE>
From the crash data I've seen from several vehicles, you don't want them. I have only seen data produced from 1 vehicle that supports an improvement from the current frontal systems.
***BLANK*** at this time
Founding member of the \"No Hummer Krew\"
Maybe Previously intended for lights/spots.
I didn't dare remove to see what they hide!
Thread Tools
Search this Thread
Display Modes
Posting Rules