I used the pocket in the kit to replace the onstar unit. I removed the black "front face" of the onstar unit. This provided the mounting bracket for the pocket. I cut a hole in the onstar face plate to allow the pocket to slide in from the front and hot glued it in. The onstar face plate is curved so I sanded it until the pocket sits flush/flat. About a 1/4 of a inch of the onstar face plate is visible on the sides of the pocket, so I use finer grit sandpaper to smooth out the sanding marks.
http://parts.nalleygmc.com/showAssem...=0&modelYear=0
It's number 30 in the image below:
CNTRY
DTOM
I have mine sitting in the garage waiting for my lazy ass to finish my stereo install.
So they are available
CNTRY
DTOM
why?
Thread Tools
Search this Thread
Display Modes
Posting Rules