|
|
09-06-2006, 09:41 PM
|
|
Hummer Professional
|
|
Join Date: May 2005
Location: Indio, California
Posts: 465
|
|
can the sensor for the air ride be tricked?
I have added the 2" torsion key lift to my H2 and it sits higher in the front now and kinda sags in the rear. Is there anything I can do to trick the sensor for the air suspension to ride higher?
__________________
2003 Hummer H2 LUX...sold
2006 Hummer H2 SUT LUX...sold
2018 Polaris GEM e4
2022 Can-Am Maverick X3 XRS Turbo RR
2024 GMC Sierra AT4X HD
2024 GMC Hummer EV 2X SUV
|
09-07-2006, 08:26 PM
|
|
Hummer Professional
|
|
Join Date: May 2005
Location: Indio, California
Posts: 465
|
|
Re: can the sensor for the air ride be tricked?
Quote:
Originally Posted by PhilD
Adjust the air ride sensors. They are adjustable up to '05.
|
where do I adjust the sensors...what tool do I need to do this? instructions needed please.
__________________
2003 Hummer H2 LUX...sold
2006 Hummer H2 SUT LUX...sold
2018 Polaris GEM e4
2022 Can-Am Maverick X3 XRS Turbo RR
2024 GMC Sierra AT4X HD
2024 GMC Hummer EV 2X SUV
Last edited by CBR_Raven : 09-07-2006 at 08:32 PM.
|
09-09-2006, 03:45 AM
|
|
Hummer Professional
|
|
Join Date: May 2005
Location: Indio, California
Posts: 465
|
|
Re: can the sensor for the air ride be tricked?
Thanks, I will take a look at it when I get some time.
__________________
2003 Hummer H2 LUX...sold
2006 Hummer H2 SUT LUX...sold
2018 Polaris GEM e4
2022 Can-Am Maverick X3 XRS Turbo RR
2024 GMC Sierra AT4X HD
2024 GMC Hummer EV 2X SUV
|
09-09-2006, 06:08 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2004
Location: Eastern Washington
Posts: 2,452
|
|
Re: can the sensor for the air ride be tricked?
Can someone post a pic of the sensor location? I've looked under there a couple of times, and can't really figure out where it's at...
__________________
'03 H2
|
09-09-2006, 05:08 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: I CAN BARELY SEE THE ROAD...
Posts: 4,624
|
|
Re: can the sensor for the air ride be tricked?
Quote:
Originally Posted by PhilD
You can't miss it, it is the only thing connected to the frame in the rear wheel well.
|
I don't see where they can be adjusted, guess I will take a closer look after some more coffee. I know my friends H2 seems to sit almost an inch higher and she doesn't have air suspension.
|
09-09-2006, 08:10 PM
|
|
Hummer Guru
|
|
Join Date: Nov 2004
Location: Eastern Washington
Posts: 2,452
|
|
Re: can the sensor for the air ride be tricked?
Quote:
Originally Posted by DDWH
I don't see where they can be adjusted, guess I will take a closer look after some more coffee. I know my friends H2 seems to sit almost an inch higher and she doesn't have air suspension.
|
Ahhh..was wondering what the h*** that was...
__________________
'03 H2
|
09-09-2006, 06:13 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: I CAN BARELY SEE THE ROAD...
Posts: 4,624
|
|
Re: can the sensor for the air ride be tricked?
Quote:
Originally Posted by PhilD
As far as I know, and I don't have air to check this, the two bolts holding the arm to the frame mount allow a little adjustment. Sometime mid cycle '05 this was changed and there was no adjustment.
FWIW On the Fabtech lift kit, which is not suitable for air ride H2's with the non adjustable sensor, it uses a bracket with plenty of room for adjustment.
I may well be wrong, but from what I've been told there is adjustment in the air ride on the earlier H2's, although the manual says there is no adjustment. Maybe it is at the other end of the sensor, the part attached to the uppoer control arm.
|
I will check it out later and see if theres any play to slid the sensor with the bolts loosened up. It always adjusts apon startup, so I think the hieght difference bewteen our rigs was.
A: had been sitting for hours.
B: my tires are about 5k away from being toast and hers are like brand new.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 12:06 AM.
|