front locker

[tukrhum]

was told someone came out with a front locker for h3?? can not find!
anyone know to get gears for front diff. only thing i can find is 4:56
same as factory.
thanks for any info glenn

[NEOCON1]

i wouldant put one in the aluminum housing but be patient , all hope is not lost

[Sewie]

Do you just want to be able to grenade it faster?

[tukrhum]

is it spin and grab or wheel hop what is braking diffs??? would the locker stop some of this with throttle control???

[HummBebe]

Originally Posted by tukrhum

is it spin and grab or wheel hop what is braking diffs??? would the locker stop some of this with throttle control???

Cast iron would only be part of the solution.

No tukr, it is "housing flex" that causes the teeth to be stripped from the ring gear.

However, it is a 7.25 inch ring gear. Waaaay to small for a 5K lb + 4x4.

I would not put a locker in a 7.25 inch front diff. Needs to be at least 8.0 and even then you have to be really careful.

I'm not sure a front locker is even needed. I've never, to this point been in a situation where someone said, "Hey Beebs, if you had a front locker, you could have stomped that obstacle".

[f5fstop]

Eight inches or more would be ok (differential you perverts), and yes, as NEO stated, be patient....

I agree with Bebe, how often is a front locker really needed? However, if you do need it, it would be nice to have.