IROK 37x12.50x17

[rusty]

anyone with air suspension run 37x12.50x17 on stock rims and did you do ok/not break air sensor.

they look to be 1/2"+ wider than my bfg mt, which are v. close when aired down.

thx

[bmf007]

Just put my new irok 36x13.5x17 no rubbing issues they measure the same as 37x14x17 witch is wierd so you should have no problems.

[Hellz]

Originally Posted by bmf007

Just put my new irok 36x13.5x17 no rubbing issues they measure the same as 37x14x17 witch is wierd so you should have no problems.

but do you have the air ride suspension in the back?

you will need to modify the control arm for the airride with 13.5 wide tires
there wont be any issues with 12.5 width tires

[Camou2]

Originally Posted by rusty

anyone with air suspension run 37x12.50x17 on stock rims and did you do ok/not break air sensor.

they look to be 1/2"+ wider than my bfg mt, which are v. close when aired down.

thx

I have the air suspension and have been running the BFG KM2 37x12.5x17 on a second set of stock rims for over two years with no rubbing and no problems. No lift on the H2.

[bmf007]

Yep have air suspension in the back no problems. Running eagle alloys 17x9 black rims and the irok 36x13.5x17 no problems. I bought the keys for the front and no probelms didnt even put them on. I just went up on my tortion bars a quater of an inch and moved my air ride sensor up an inch to gain some height inthe rear and looks great. Thinking i should of went with a bigger tire but it looks good.

[HumminNBoatin']

I would do the "Air Sensor Mod" (Search it on this site) just to be sure. If you never go offroad you will be fine. But the first time you flex that suspension with a wider an taller tire you risk a big chance of breaking the sensor arm.

I did this mod and have never had a problem running my Toyo Open Country M/T's. They are 37x13.5x18. Really they are 14.2" wide.

[DuckTruck]

I had the air suspension (before I modded it into a "hybrid" system....check my post for more details) and am running 39.5x13.5x17 bias ply IROK's on my stock wheels with no lift on the rear.

Only issue I had was I had to grind or trim a bit of metal off of the support bracket for the air ride sensor arms.....no biggie at all. Other than that.....no probs.

DUCK

[bmf007]

What r you running up front any lift? Do you have green keys or torsion keys cranked all the way up?

[Big.Z.hummin]

Originally Posted by DuckTruck

I had the air suspension (before I modded it into a "hybrid" system....check my post for more details) and am running 39.5x13.5x17 bias ply IROK's on my stock wheels with no lift on the rear.

Only issue I had was I had to grind or trim a bit of metal off of the support bracket for the air ride sensor arms.....no biggie at all. Other than that.....no probs.

DUCK

Any pics of this Beast? It sounds Bada$$!