difficulty installing a light bar

[kalantar]

How hard is it to install a light bar without the wiring harness that came with it? Is it basically 2 wires with an on and off switch?

I found a used one for sale but it doesnt come with the harness.


Thanks!

[Rene S. Nielsen]

Hi

I bought one just like it, it's really no problem.

One mine there where 3 wires 2 positive and one ground.

One positive for the 2 inner lights on the light bar, and another for the 2 outer lights.

I just wired these 2 positive together with a single one using a bigger gauge (hope this is spelled right).

And then I put a reley on it with a on/off switch.

The biggest problem was to get the big gauge positive all the way out to the battery.

Best regards
Rene

[Vettster]

If you have the factory harness, it's plug and play.
All you have to do is drill a hole for the switch in the overhead console.
The part number for the kit (including the lights) is 89006865.

I bet some savy parts man could come up with the component part numbers.

[kalantar]

Thanks, so the wiring isnt too complicated

How do you connect the wiring, you dont drill a hole in the roof?

[Metallic Red]

If you get the factory harness, the wiring is already through the gromet, like Vettester said, plug & play.

[kalantar]

Called 3 dealers today, no one carried it. Talked to a few members here and they said it wasnt worth the trouble.
Decided to go with a custom one or possibly the Delta.