bearing is out on H2 and Dealer said they wont cover it because I have 37 inch tires

[kalantar]

Had new shocks put in and the after market shop said my right bearing is going out. Call the dealer this morning to see if my extended warranty would cover it and they said if you modified the tires you are on your own. This was Tustin Hummer, any fellow owners have experience with this?

[HumminNBoatin']

H2's are known for Hubs going out. I would try a diffenent dealer. That's bad Customer Service if you ask me.

[kchummer]

Just out of curiousity, what year and how many miles does your H2 have on it?? I've heard they're notorious for the wheel bearings to go to Sh*t even after mild driving conditions....thanks

[HumminNBoatin']

Mine is an 03. I did both of mine at about 70K miles. Did them both myself and they have lifetime warranties on them. Its actually a pretty easy job.

[kchummer]

Kalantar, how many miles and year do u got?? just curious?? thanks!

[kalantar]

it is an 04 with 55k miles on it, put the 37X13.5 tires on them about 10k miles ago. Called another dealer they said it might be covered under warranty, I will take it down to them in a few months time since the play isnt that bad as of now.

[kalantar]

Originally Posted by HumminNBoatin'

Mine is an 03. I did both of mine at about 70K miles. Did them both myself and they have lifetime warranties on them. Its actually a pretty easy job.

Do you mind sharing how much you paid for the parts? What exactly does it take to switch it out? thanks...

[OrangeCrush]

Changing out hubs isn't a difficult job.... having said that, it should still be covered under warranty. The fact that the tires are taller have NOTHING to do with the bearings going bad.

IF ANYTHING, the taller tires have a larger diameter and rotate less times in one mile than a smaller tire.

Based on that logic, the bearings aren't revolving as much as a stock truck.

Just another way the dealer/warranty tries to screw us.

Mark

[AUHUMMER]

Originally Posted by kalantar

Do you mind sharing how much you paid for the parts? What exactly does it take to switch it out? thanks...

Got mine at Advance auto parts for about $190 each including tax. Go to gmtruckclub.com and search---there's a great post with pics and step by step instructions. Its pretty basic stuff---hell I could even do it. But, eat your wheaties. Those 22mm bolts holding the calipers and the 15s on the hub are TIGHT. The earlier post is spot -on, you definitely need a breaker bar. I had a clearance problem with the 1/2" drive on the hub bolts and had to use the 3/8" drive. By the time I was done I had busted 2 15mm sockets and 1 ratchet. Good old Sears took 'em back----didn't tell 'em I was using a 3 foot pipe on the ratchet.

Hub bolt is a 35.5 mm but a 1 3/8" will fit great. I used a 3/4" drive socket and big ass breaker bar.

Good luck--

[porschett]

Originally Posted by kalantar

Had new shocks put in and the after market shop said my right bearing is going out. Call the dealer this morning to see if my extended warranty would cover it and they said if you modified the tires you are on your own. This was Tustin Hummer, any fellow owners have experience with this?

I believe every auto company in the world states in their owner's manual that any modifications to the vehicle will void the warrenty. Given this fact, why would you take the chance of your claim being denied when it's so easy to change the wheels and tires back to the original for the repairs?

I once blew the trans out of a Ferrari after installing a supercharger on it. It took 8 hours to remove it back to stock, but they covered the repairs.

[Guinnessboy]

legally they can only deny a claim on warranty if the modification directly impacts the failing part.

[MONSTERMATT]

what happened to the stock tires?? i wonder what they would say if you put those back on and then took it in????