I'm a new poster to this forum but figured I might as well get started with something useful so In my next few posts I will detail the installation process of my Coastal Tech Gen 5 Lockpick and Ipod Lockpick in my 2008 SUT.
Happy Thanksgiving
Note: Turn off the ignition and take out the keys before proceeding.
1. First remove the trim surrounding the radio and heater. I used a large screwdriver wrapped in duct tape to pop out the friction fittings on either side of the bottom trim, then just used steady hand pressure to remove the middle and upper fittings - when the trim panel is loose you need to pull it lightly downward to disengage the top of the clock/vent panel from the dash.
Thread Tools
Search this Thread
Display Modes
Posting Rules