|
#1
02-03-2006, 08:46 PM
Hummer Veteran
Join Date: Oct 2005
Posts: 45
i got brave and tweeked the torsion bar 2.5 turns. i gained about an inch and a quater. when i checked the distance from wheel to fender there was a quater inch differance from one side to the other.this was before i did any ajusting. didnt know if i should turn torsion nut to make even or leave it
#2
02-03-2006, 08:46 PM
Hummer Veteran
Join Date: Oct 2005
Posts: 45
i got brave and tweeked the torsion bar 2.5 turns. i gained about an inch and a quater. when i checked the distance from wheel to fender there was a quater inch differance from one side to the other.this was before i did any ajusting. didnt know if i should turn torsion nut to make even or leave it
#4
02-04-2006, 12:18 AM
Hummer Professional
Join Date: Dec 2005
Location: Davenport Iowa
Posts: 428
Drive it first, Hit a couple of bumps then re measure it,, also where you parked on a level area? That might of been the difference. Do 2-1/2 turns then drive it and check it again. It should be level unless it wasnt set-up right from the factory. If its still off make the adjustment on one bolt to even it up... See ya
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 08:58 PM.
Hybrid Mode